Homemade pallet forks

[deanwerden]

Looks like all my links are Dead.. I switched around some pictures in my photo bucket. I finally got to see if little tractor would pick up a snowmobile so I can stack them for the summer. mission accomplished. This is about as high as I wanted to go without the backhoe on




need to track down a double pallett

 

[deanwerden]

I'll put a few pictures back up

 

[Raw Dodge]

Very nice! I get you with the ballast,nothing like that uneasy feeling of a tractor getting light rear tires .

 

[woodchipper]

Very nice little set-up! Looks like you have put on new forks. Using heavy wall chanel is a good way to go if you don't need the "real" stuff!:thumbsup:

 

[deanwerden]

nope still using the original tube forks.

 

[gordyy]

Now you need a set of these they were pricey but they sure are worth it.
I have one and have a set of home built forks for my SC 2400
takes about 10 seconds to change from bucket to fork to ( I have an old truck plow and an old auction buy of a broom that I am going to mount to the loader) waiting to get my cab built before I worry about putting more snow attachments on it.