malk315
Silver Member
Thought I'd share what a CK-20 w/ 45000 SQ ft. of inexpensive Tractor supply fertilizer, 500 lb rear Nortrac spreader w/ 40 ft swath to spread in 10 minutes and a DMM-60 deck for cutting results in...
Would never trade my mowing setup for a zero turn or otherwise. Here's a video I shot engaging the deck... sweet sound at 3000 RPM can cut wet grass that is two times too long at full speed in low range and never slows down. Put a new drive belt on the deck this year for the first time in 8 years (original being saved as backup!). Got a Gates and Korean replacement belt -- using the gates now. Also have 2nd set of blades deck hasn't been made for several years but love it and hope to have it for many more years.
Machine performing just perfect after changing every fluid and filter w/ just help from my bro the first time a couple months ago. About to hit 500 hours and machine has done tons of work these past 8 years.
Would never trade my mowing setup for a zero turn or otherwise. Here's a video I shot engaging the deck... sweet sound at 3000 RPM can cut wet grass that is two times too long at full speed in low range and never slows down. Put a new drive belt on the deck this year for the first time in 8 years (original being saved as backup!). Got a Gates and Korean replacement belt -- using the gates now. Also have 2nd set of blades deck hasn't been made for several years but love it and hope to have it for many more years.
Machine performing just perfect after changing every fluid and filter w/ just help from my bro the first time a couple months ago. About to hit 500 hours and machine has done tons of work these past 8 years.
