Hagalaz14w
Member
I spotted it while out riding my motorcycle.The sign said the owner wanted $2600 for it. Anyone recognize the model?
Found this the other day
- Thread starter Hagalaz14w
- Start date
- Views: 2019
I spotted it while out riding my motorcycle.The sign said the owner wanted $2600 for it. Anyone recognize the model?
tcreeley
Elite Member
Nice tractor!
motownbrowne
Elite Member
- Joined
- Dec 30, 2013
- Messages
- 2,613
- Location
- river falls, wi
- Tractor
- Kubota mx4700 HST, New Holland TC-29D
It's a Ford. It's not an N series. I think it's an NAA, but I'm not sure. Could be a 6 or 800 series. Could be a good deal if it comes with the disk and the other back tire is as good as this one. Also, I'd want to make sure it doesn't have the select-o-speed transmission. It's nice looking, though.
Kirk-NJ
Gold Member
- Joined
- Sep 20, 2009
- Messages
- 413
NAA. Comes with front wheel weights and the disc. Might be a too bad of a price but would have to take a closer inspection.
Must be down south with no snow in the photo.
Kirk
Must be down south with no snow in the photo.
Kirk
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i think i see a rear axle nut.. so naa.
those things are orphans on hyd cover parts, and some castings.
if price was right and it ran good with no issues can still get some work done.
those things are orphans on hyd cover parts, and some castings.
if price was right and it ran good with no issues can still get some work done.
OP
Hagalaz14w
Member
My question is would this be a candidate for restoration?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
I've worked on much much worse.
My advice, start with one that runs good and works as a first resto.
Lipstick and clothing are easy to apply, start with good mechanicals.
Later with more practice you can bring them home in boxes and then start the jigsaw puzzle from scratch
My advice, start with one that runs good and works as a first resto.
Lipstick and clothing are easy to apply, start with good mechanicals.
Later with more practice you can bring them home in boxes and then start the jigsaw puzzle from scratch
skylarkguy
Platinum Member
Looks pretty nice, guess you should see how it runs...orphans need homes too. 