Ford 1710 770B FEL lines

   / Ford 1710 770B FEL lines #1  

foodplotter1710

New member
Joined
Oct 5, 2025
Messages
2
Tractor
Ford 1710
Hello, I need to replace two steel hydraulic lines on my 770B FEL. Unfortunately they’re the two longest lines (go to opposite side along top edge of the bucket). Can I just run hydraulic hose in their place? Or are replacement steel lines preferred? If so any idea where I can get a set?
Thanks
 

Attachments

  • IMG_4790.jpeg
    10 MB · Views: 9
  • IMG_4787.jpeg
    10.2 MB · Views: 7
   / Ford 1710 770B FEL lines #2  
Yes you can use hose to replace the steel lines. If you have a good hydraulic shop in your area they might have the equipment to make replacement steel lines also. Might have to take the loader to them so they can bend to fit especially if old ones are bent and deformed.

Benefit of steel is they don’t deteriorate in the sun and possibly cost less than hose.

Benefit of hose and you can typically get hoses easier than finding someone to make steel lines.
 

Tractor & Equipment Auctions

JOHN DEERE/UNVERFERTH 1700/330 LOT NUMBER 13 (A53084)
JOHN...
UNUSED KIVEL 3500# PALLET FORKS (A54757)
UNUSED KIVEL 3500#...
UNUSED LANDHONOR LDH-HT380 STAND ON SKID STEER (A54756)
UNUSED LANDHONOR...
2011 CHEVROLET EXPRESS SERVICE VAN (A51406)
2011 CHEVROLET...
TAKEUCHI TL10 SKID STEER (A52705)
TAKEUCHI TL10 SKID...
FAE UML/SSL 150 VT BL HYD MULCHING HEAD (A51406)
FAE UML/SSL 150 VT...
 
Top