gschones
Bronze Member
I changed a hydraulic line on my 1510 this weekend and had a couple of questions. First, I looked in the manual and there are three drain plugs shown. One in the middle of the front of the transmission and two in the rear axles. I drained the front and when I took out the rear plugs nothing came out although they are lower points.
Second the book showed that it took 19 quarts. After putting in the 19 quarts it still did not register on the dip stick. I added the remaining quart from the 5 gal bucket and I now get it to register on the dip stick but only if I screw it in all the way.
Any thoughts on this are appreciated. Thanks, Gary
Second the book showed that it took 19 quarts. After putting in the 19 quarts it still did not register on the dip stick. I added the remaining quart from the 5 gal bucket and I now get it to register on the dip stick but only if I screw it in all the way.
Any thoughts on this are appreciated. Thanks, Gary
