First job with my M7060HSC

RoyKing · Apr 23, 2019

Had to drive about 20 miles with tractor, no trailer. So top speed is limited to 25MPH, top gear the speed limit light comes on yellow in the dash and sets the top rpm at 2k. Had my new air seat installed, turned all the lights and flashers on. Road very nicely, got to the site had to lift a 30Kva Gen off a trailer and place on the base made of two concrete railway ties, freight weight was listed at 2K. Picked up easily with no ballast other than water in tires, used creep gears for precision work. Added fuel to gen plus batteries 24v and it fired right. Drove home gave me good engine break-in, stress the rims and warm the tires. Will go over wheel and loader bolts with air wrench.

Thomas · Apr 23, 2019

Now that's what I call going for ride on tractor.

big bubba · Apr 23, 2019

nice machine. assume of course you were not in 4wd on that long pavement run. hard on the drive train in 4wd. congrat!

hseII · Apr 24, 2019

RoyKing said:
Had to drive about 20 miles with tractor, no trailer. So top speed is limited to 25MPH, top gear the speed limit light comes on yellow in the dash and sets the top rpm at 2k. Had my new air seat installed, turned all the lights and flashers on. Road very nicely, got to the site had to lift a 30Kva Gen off a trailer and place on the base made of two concrete railway ties, freight weight was listed at 2K. Picked up easily with no ballast other than water in tires, used creep gears for precision work. Added fuel to gen plus batteries 24v and it fired right. Drove home gave me good engine break-in, stress the rims and warm the tires. Will go over wheel and loader bolts with air wrench.

What’s HSC?

Here’s my Bota- M7060HD-12

I’ve been waiting all week to find time to share this- take 30 minutes & go ahead & do this Mod also.

After a while, the frogs start freeing up: I’m sure we could keep playing with the jam nuts on the keepers, but this is more direct.

2- 1/4” Shackles
2- 1/4 Quick Links
4’ of 1/4” Chain

Have a Good Day.