What is the best fire estinguisher for a round baler? 
Where can I find a source for them?
		
		
	 
Hello drbarta,
Any local welding supply company in your area will 
have ABC and CO2 fire extinguishers as most of them 
recharge them and inspect annually them as well-this 
is required by most insurers for adequate insurance 
coverage in the case of loss of property by fire or lightning.  
Ideally if you can purchase a 20 pound CO2 fire extinguisher 
and have a smaller ABC powder unit as a back up unit that
will work well as the CO2 unit will not leave any residue if you 
are unfortunate enough to have a fire occur in your baler.  
You will want to wash the baler out with a steam jenny preferably to 
remove the residue and any grease that has accumulated and did 
not burn up if the baler is still serviceable.
If at all possible have a gasoline powered leaf blower available to clear 
out the bale chamber and any dust that remains in the twine box and 
the knotter area as the dust of course is highly combustable.