Jul 2, 2010 / EZR 1542 blades won't engage #1 M mrstang01 New member Joined Jul 2, 2010 Messages 1 Tractor Ariens EZR 1542 I just replaced the blades and belt on the deck, and now the blades won't engage without smoking the belt. Could the blades be too tight? I checked the belt, it's the same part number and length as the one I took off.
I just replaced the blades and belt on the deck, and now the blades won't engage without smoking the belt. Could the blades be too tight? I checked the belt, it's the same part number and length as the one I took off.
Jul 2, 2010 / EZR 1542 blades won't engage #2 J Jim Thompson Gold Member Joined Oct 25, 2009 Messages 275 Location Fleming Island,FL Tractor John Deere 2006 4320 CUT, 1970 Power King 2416 Check that you haven't inadvertently mis-routed the belt outside the belt guides. There will frequently be at least one guide associated each pulley.
Check that you haven't inadvertently mis-routed the belt outside the belt guides. There will frequently be at least one guide associated each pulley.
