Dont laugh at me too hard !

[dclynch]

I have a tractor that has two levers next to the hydaraulic lever that is used for raising and lowering the 3pt. Would these work for a TNT? there are a total of 4 ports 2 on each. Are these called rear remotes? As you can see I am not a tractor expert just use it for brush hogging planting a garden and food plots, and plowing snow it sits in the garage most of the year.

 

[CobyRupert]

Don't laugh at me, but what is a TNT?

 

[murphy1244]

I have a tractor that has two levers next to the hydaraulic lever that is used for raising and lowering the 3pt. Would these work for a TNT? there are a total of 4 ports 2 on each. Are these called rear remotes? As you can see I am not a tractor expert just use it for brush hogging planting a garden and food plots, and plowing snow it sits in the garage most of the year.

Seems you have two Remotes and yes they would work on a TnT set-up. TnT Is a Hydraulic Top link and a Hydraulic Box Leveler.

 

[k0ua]

Don't laugh at me, but what is a TNT?

Top N Tilt.. in other words. hydraulic cylinders replacing the "Top" link, and a hydraulic cylinder replacing the side tilt lifting link, usually on the right side of the tractor. So you are replacing mechanical jack-screws with hydraulic cylinders. So now you can make adjustments to an implement on the fly from your seat instead of getting off of the tractor to adjust the toplink length or the side like to adjust the tilt of an implement.

James K0UA

 

[dclynch]

Thanks for the quick replies, I definitely will be lookin into getting a TNT.

 

[whodat526]

it all depends on the tractor you have one could be a draft control

 

[GManBart]

it all depends on the tractor you have one could be a draft control

But he's got two remotes...for two levers

 

[GManBart]

Thanks for the quick replies, I definitely will be lookin into getting a TNT.

No need to look farther than here....I have no affiliation, but this is where I'm getting a TNT before long.

Fit Rite Hydraulics - fitritehydraulics.com

 

[gwdixon]

How about a photo of the back of your tractor showing the remotes? That would help to clarify the issue.

 

[wedge40]

I dont think I've ever heard anyone complain about having TnT. ;-)

Wedge