RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
DK50 questions
- Thread starter RoyJackson
- Start date
- Views: 1894
grsthegreat
Super Star Member
my dk45 is 2010 and there are no seat switches at all. They told me when i purchased it that cab unit dont require seat switches because you cant fall out of the cab while operating it. I use my chipper all the time while out of unit.
OP
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Thank you!
rademamj1
Veteran Member
- Joined
- Oct 8, 2019
- Messages
- 1,129
- Location
- Waco, Texas
- Tractor
- Kioti CK4010 SEHC, Kubota GR2120, Gravely Proturn 460
I have been using a CK4010SEHC, also a factory cab model for three years now, with a WoodMax chipper, and Kioti has no seat shutoff switch on my tractor. I think you will be just fine.
Mid PTO mower tractors and Zero Turns typically have the seat safety shutoff switch. My Kubota GR2120 mower came with the safety switch, and it was so incredibly annoying, I eliminated the switch in just 10 minutes work.
Mid PTO mower tractors and Zero Turns typically have the seat safety shutoff switch. My Kubota GR2120 mower came with the safety switch, and it was so incredibly annoying, I eliminated the switch in just 10 minutes work.
k0ua
Epic Contributor
My 2012 open station DK35se does not have a seat switch either. I don't think any of that line do. The owners manual covers the DK35se the DK40se the DK45se and the DK50se all in the same manual. No mention of seat switches. Very handy when using forks as you can stand up to get the fork tips guided into the pallets.
grsthegreat
Super Star Member
I am surprised that an open station dont have the switch....really surprised .
OP
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Thanks for all the answers!!
Gave the tractor a pretty good run through, but I'd forgotten about off seat PTO work.
Pretty nice machine, but needs a good clean up...not neglect, just from living outside
Gave the tractor a pretty good run through, but I'd forgotten about off seat PTO work.
Pretty nice machine, but needs a good clean up...not neglect, just from living outside
Last edited:
justman777
Platinum Member
I'm surprised anyone has a tractor without a seat switch. My 2018 NX is a cab unit with a seat switch. I inserted a toggle switch bypass so I can turn it off when needed. As an aside, I manage to turn it on (make active) all the time because my arm hits it when I come off the loader control.
OP
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Well, an interesting update...
The tractor is not a 2011...it's a 2001. A serial number search proved this out.
The seller is quite upset, as you might expect...he had taken the word of the owner before him. I offered $12K (asking price was $22900).
Too bad, nice tractor for $12K...
The tractor is not a 2011...it's a 2001. A serial number search proved this out.
The seller is quite upset, as you might expect...he had taken the word of the owner before him. I offered $12K (asking price was $22900).
Too bad, nice tractor for $12K...
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,169
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
I have been surprised by the number that do,
I've never had one on anything except lawnmowers.
I'm more used to rear fender mounted lift arm and pto switches.
Roy good luck with your tractor buying.
