Clicking noise

/ Clicking noise #1  

lake_arthur

New member
Joined
Apr 16, 2004
Messages
10
Location
Lake Arthur Lousiana
Tractor
Branson 2810
Has anyone heard a clicking noise, sounds just like the hazard light clicking when the hazard lights are on, but this is after I wash my 2810 and it is not running and no lights are on. Sounds maybe like a relay switch going bad. It only does it when it gets wet. Sound comes from around the lower steering column. Thanks
 
/ Clicking noise #2  
Sounds like you are getting water into the hazard switch or on the wiring behind it at the connector,Try using some anti conductive grease on the connection then seal the area with silicon, If this does not work call your dealer and have them speak with Tech support
 

Marketplace Items

Indian Totem Pole (A64557)
Indian Totem Pole...
JMR 78in Dual Cylinder Grapple Skid Steer Attachment (A64553)
JMR 78in Dual...
2011 Kenworth T300 S/A 17ft. Cab and Chassis Truck (A64194)
2011 Kenworth T300...
PETRATOOLS HAND PUMP SPRAYER (A64278)
PETRATOOLS HAND...
LONG PTO 5" X 6" IRRIGATION PUMP (A64278)
LONG PTO 5" X 6"...
2018 HARPER ATM 72LC MOWER (A66091)
2018 HARPER ATM...
 
Top