CH3510 Fel

[Threepoint]

I finally got to see and test drive a CK3510SEHC.We also did a liader lift test 1600 lbs on a skid.
Was able to get it off the ground but was in desperate need of ballast. I am convinced it will handle my totes of wood.
Cab was roomy and did not obstruct my view as much as I feared.
Bottom line I was impressed and ordered one from my local dealer.
My wife and I are leaving on vacation Monday.
Tractor should be in by the time we get back in 2 weeks.

Two weeks of vacation, then a new tractor waiting when you return.
Doesn't get much better than that! :dance1:

 

[Seat time]

I know, you致e got to take your blessings when they come and appreciate them. Stop and enjoy the view from the mountain tops, because the next valley is waiting for you.

 

[Seat time]

Ck3510sehc delivered today.
So far so good.
I thought I read on here that there was a power outlet on these but I am not finding it.
Also looking for suggestions on after market stereos.

 

[Threepoint]

Ck3510sehc delivered today.
So far so good.
I thought I read on here that there was a power outlet on these but I am not finding it.
Also looking for suggestions on after market stereos.

If the OEM radio cutout and trim setup on the CK cab models is the same as on the NX, this unit will fit well.
Pyle - PLMR19W - Marine and Waterproof - Headunits - Stereo Receivers
You can find it online for around $45 and less. Amazon.com: Pyle Stereo Marine Headunit Receiver - 12v Single DIN Style Digital Boat In dash Radio System w/MP3 USB SD, AUX, RCA, AM FM Radio, Weatherband - Remote Control, Power Wiring Harness - PLMR19W (White): Car Electronics

Sound is quite good (and, hey, it's in a diesel tractor). Durable enough for marine use, and it's been working fine for me for four years. The NOAA weather band capability is a nice feature. Also lightweight, so no need to use a rear support strut. That would require raising the cab roof a few inches to get access from above. Not hard to do, if you want to bother and have a dry place to work. (You'll probably want to do that anyway, if you change out the front and back OEM work lights, or add side work lights).

BTW, the factory Kioti stereo wiring harness plug is reportedly compatible with this one Amazon.com: Stereo Wire Harness Isuzu Rodeo 2 3 4 24 (car radio wiring installation parts): Automotive as well as one available for certain Honda models. Or you can just cut off the Kioti factory plug and splice the wires. If you do that, leave about 3" of wire on the plug so you can splice it back in later if you want.

Also, this TBN link might be helpful https://www.tractorbynet.com/forums...379567-aftermarket-stereo-install-nx-cab.html

 

[Seat time]

Thank you for all the great information.

 

[deezler]

Ck3510sehc delivered today.
So far so good.
I thought I read on here that there was a power outlet on these but I am not finding it.
Also looking for suggestions on after market stereos.

Delivered yesterday, and still no pics for us?!?!? lol. Congrats, thats an awesome machine. I want one also but don't think I can afford or justify the cab model.

 

[Seat time]

I know I am a slacker.
Had company last night and I won稚 be home this evening so I hope for some seat time Friday evening.
So far I got to drive it around the yard and park it.

 

[slckeys]

As far as power outlet...I have a 4010sehc and there is one below my left arm as I sit in the seat. Hopefully that gives you an idea or rough picture of what I'm trying to describe. It's kinda hidden....

 

[Seat time]

Thank you, I found it right where you said it would be.
They hid that rascal pretty good.

 

[Coyote machine]

FYI, on my DK-40se/hst I use a Box Blade, BB and 2 55 Gallon plastic barrels filled with sand, at +/- 810#s/each. I strapped them in a leaning back position, and it provides close to or slightly more than my Kioti KB-2485 Backhoe. Your model may need less ballast, but this works well for me, and I can drop the BB and unstrap the barrels and lift each with the FEL as needed.