Hi
I am have a bx25 with a 3pt hitch kit and 51" snow blower that I am trying to mount on it.
Once I picked the blower off the skid with the 3pt hitch it would not go down all the way to the ground (flat garage floor). It appears that the (non adjustable) lift link is binding between the upper lift arm and lower arm. It is not able to descend. I asked the dealer about this and they showed me another kit with exactly the same angles on this lift link. They suggested that my check chains were too tight so I loosened these but it still won't go down.
Does anyone have a bx25 with 3pt mounted snow blower with pics I could look at? I would like to know what I am doing wrong here.
The other item I am interested in is which hole is used on the blower for the lower arm pins.
Thanks
bxn
I am have a bx25 with a 3pt hitch kit and 51" snow blower that I am trying to mount on it.
Once I picked the blower off the skid with the 3pt hitch it would not go down all the way to the ground (flat garage floor). It appears that the (non adjustable) lift link is binding between the upper lift arm and lower arm. It is not able to descend. I asked the dealer about this and they showed me another kit with exactly the same angles on this lift link. They suggested that my check chains were too tight so I loosened these but it still won't go down.
Does anyone have a bx25 with 3pt mounted snow blower with pics I could look at? I would like to know what I am doing wrong here.
The other item I am interested in is which hole is used on the blower for the lower arm pins.
Thanks
bxn
