BX2200 hydraulic hose size.

[aczlan]

Thank you for info, I've been the hydraulic shop route and the NAPA route before and because of cost and travel distance, I want to avoid that. I don't see why the fittings on the B7500 would be different than what Kubota uses on the subcompacts, unless I get a definite on the BX fitting threads. I will measure the hoses and order from Surplus Center. Thanks

Just take one of the fittings off at the cylinder end and see what it looks like.
On the quick connects, if you replace that end of the hose, our b 7500 needed a jic male to npt male adapter.

Aaron Z

 

[JWR]

I have had to replace hyd hoses for both power steering and the loader on my BX2200. Long-serving local dealer in business for many decades says the orig Kubota hoses are a frequent failure item. He uses heavier hoses for replacement and has never had a repeat failure. That said, I can't help on exact sizes. If it is power steering hoses your best move is to take the whole tractor to a dependable shop ( I used the dealer) and have them replace BOTH hoses. Have to darn near disassemble the tractor to get to the rear end of those hoses. I did the loader hoses myself by just removing them and taking to a local hose-capable shop that duplicated them for me.