Donovansmobile
New member
I have a 2011 toolcat 5610. Braking system seems to be pulling and slows machine down. Heating up differentials. No codes displayed. What can I check before taking to dealer?
Brake system sticking
- Thread starter Donovansmobile
- Start date
- Views: 3783
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,281
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
:welcome: to TractorByNet! :thumbsup:
Check that the fluid level is correct in the hydraulic reservoir.
The brakes are on with spring pressure and off with hydraulic pressure.
The brakes are released by a solenoid on the pilot valve, when the Forward/Reverse lever is shifted out of Park.
The service manual for my 2012 series F does not show any mechanical adjustments.
Check that the fluid level is correct in the hydraulic reservoir.
The brakes are on with spring pressure and off with hydraulic pressure.
The brakes are released by a solenoid on the pilot valve, when the Forward/Reverse lever is shifted out of Park.
The service manual for my 2012 series F does not show any mechanical adjustments.