Ball Hitch on bottom of BX24?

   / Ball Hitch on bottom of BX24? #1  

cwilliams2000

Member
Joined
Oct 18, 2009
Messages
47
I noticed without my BH on that there is a hole on the bottom which seems to fit a ball for a trailer just right. Is this OK to do? I haven't tried to put my BH back on but am concerned it will interfere?
 
   / Ball Hitch on bottom of BX24? #2  
Won't interfere with the BH. I have one on mine with no problems.
 
   / Ball Hitch on bottom of BX24?
  • Thread Starter
#3  
Cool thank you, its a little tricky to pull a larger trailer to move around the yard since it is very low,but its helpful to have it there when I am in "lawnmower" mode and can still get this chore done. thank you!
 
   / Ball Hitch on bottom of BX24? #5  
I took a bumper receiver hitch from harbor freight and drilled a few extra holes in it to make it fit.
PB140611.JPG


And I use a Riser Hitch to get my trailers level.
PB140612.JPG
 
   / Ball Hitch on bottom of BX24? #6  
Here are a few pics of my weight bucket project w/ receiver hitch. I don't have a BH, but if you run much without your BH this could work nicely.
 

Attachments

  • IMG_0037.jpg
    IMG_0037.jpg
    122.5 KB · Views: 349
  • IMG_0038.jpg
    IMG_0038.jpg
    112.5 KB · Views: 315
  • IMG_0040.jpg
    IMG_0040.jpg
    145.1 KB · Views: 333
  • IMG_0041.jpg
    IMG_0041.jpg
    150.5 KB · Views: 358
  • IMG_0018.jpg
    IMG_0018.jpg
    134.1 KB · Views: 336
   / Ball Hitch on bottom of BX24? #7  
I took a bumper receiver hitch from harbor freight and drilled a few extra holes in it to make it fit.
PB140611.JPG


And I use a Riser Hitch to get my trailers level.
PB140612.JPG

I had that same HB hitch welded to my 3PH draw bar so I could move my trailer around as well. The draw bar hitch was originally set up to use with my Cyclone Rake, but now it does double duty. :thumbsup: This is the best pic I have of the set up, but you can see the square receiver hitch on the bottom of the 3PH draw bar. Being able to raise and lower the trailer hitch makes hooking up very easy.
 

Attachments

  • BX Draw Bar Hitch 005.JPG
    BX Draw Bar Hitch 005.JPG
    697.8 KB · Views: 619
   / Ball Hitch on bottom of BX24? #8  
Ditto on the receiver bolted to the bottom. Clears backhoe and 3pt hitch. Had to leave extended quite a bit to keep the males from hitting the through bolts.

(Disregard the tape measure and the filth...was putting on the wheel spacers in a hurry).

DSC04231.JPG
 

Tractor & Equipment Auctions

2015 JOHN DEERE 35G EXCAVATOR (A51242)
2015 JOHN DEERE...
Set of AG R4 Wheels and Tires (A52128)
Set of AG R4...
CHALLENGER MT465E TRACTOR (A51406)
CHALLENGER MT465E...
LAMAR 20 T/A TRASH TRAILER (A50854)
LAMAR 20 T/A TRASH...
2023 CFG QNT45 Mini Excavator (A49461)
2023 CFG QNT45...
71066 (A49346)
71066 (A49346)
 
Top