Price Check B7500 Pricing

[WoodnSteel]

Looking for opinions. I have been following the numerous posts regarding pricing of a B7500 w/FEL and R4's. I was personally quoted $15, 130 for a price locally.

Looking for suggestions on what I should or could offer. I have looked at all the posts and etc. But I wanted to get some ideas from some of you savy buyers out there. Any suggestions such as asking the dealer to throw in 50 hr, maybe deal on other accessories, toothbar, blade, etc. Thanks

 

[cchoate]

This time of year you might want to try another near-by dealer (if there is one). Dealers sell alot of tractors in the spring (when I bought mine). I payed 11,400 for my 7500hst with mmm and all the parts for the 50 hour service.
A fel is 2800 installed from my dealer.

 

[chim]

I paid $12,800 + tax for a new B7500HSTw/ a 302 FEL and R4's this past Spring. At the price you were quoted, I'd ask them to throw in a mower/w3tcompact/icons/smile.gif. I priced identical units at three dealerships. The other two dealers were asking $750 and $1,500 more than what I paid. All were within 1/2 hour radius of home. There are two different Kubota loaders available, and the 302 is the heavier of the two..............chim

 

[gusg]

I paid $14,300 with a 60" MMM and a 302 FEL with R4 tires. I got them to throw in what I would need for the 50 hour service and a rear work light. Of course there was tax so it was $15,100 out the door delivered.

 

[frank_f15]

i personaly think that is way to high a price for 7500. 18 mo. ago i was quoted for the exact same machine $12,500 a b2410 at that time with same options was $15,300. i know that was awhile back but don't beleive they went up that much, u might best check some other dealers.

 

[Anonymous Poster]

Don't forget to look at the following link for good ball park pricing of Kubota B series tractors:

<A target="_blank" HREF=http://www.kazez.com/~will/kubota.html> Click here (Thanks Will)</A>

Bill in Pgh, PA

 

[WoodnSteel]

Thanks everyone, I will do just that. Boy did I screw up. I apologize for this one. I just noticed that I wrote 15, 150 instead of 13, 150 for 7500 hst, 302 FEL and R4's. Does this sound more reasonable. Must be my big clumbsy fingers on the key board. I accidently hit the 15 instead of 13. Anyway, I did get one other quote from a nearby dealer and they actually wanted 13, 250. $100 bucks more. In my area, there are only about 2 dealers that I can find. The next closest is about 3 hours away. I may have to make an offer and see if they bite. I appreciate everyone's input and again apologize for my mistake. It should have read "does 13,150 sound good for a 7500hst, 302 and r4s?" Give me time, I will learn to proof read better. THanks again

 

[gusg]

Is the $13,150 out the door delivered or do you have to add tax? Like I said in my previous post, if I take $2300 off for my MMM, my price before tax would have been about $12,000. So the $13,150 still seems high to me.