I need to rebuild the control valve on my FEL. Is there a rebuild kit out there? If so is there one on line i can order? My loader just desnt seem to have the power it used to. It sticks ,bleeds down and will not lift the front of the tractor at all. It just seems really weak. I am suspecting it is internally leaking. It carry's weight great ,but thats it.
B7200 FEL control valve
- Thread starter Madcat
- Start date
- Views: 1579
Egon
Epic Contributor
I had the same type of problems with the loader control on my Kubota B7100. I was positive it was a worn out controler. In a sense it was. The linkages were worn out. The valve internals were good.
The service manager told me before even looking at it that the internals seldom wear out.
The service manager told me before even looking at it that the internals seldom wear out.
Egon
Epic Contributor
Yes the linkage was replaced and all worked well again.
dirt clod
Gold Member
- Joined
- Jul 21, 2006
- Messages
- 331
- Location
- panama city and altha florida
- Tractor
- Kubota L3300, m5700, case 580se
Same thing with mine. If your linkages are worn and sloppy it will be picky about where you put the handle to make it work and not want to dump or push down as it reduces the movement on the valves that you lift up to operate. I just got through replaceing the worn parts on mine it works great now. Not a bad job at all to do about 20mins.
