B2x20 Backhoe/3pt hitch help

[donn12]

I could swear I read that most of the three point hitch could be left on while the backhoe is mounted. Is this true and what stays/what goes? I dont see any way to keep from taking the whole thing off each time. Also I miss my BXpanded backhoe dolly. The BH65 takes up some space with the stabilizers down.

 

[art]

I've found that if it is done sseveral times it really is quite easy for most once they have a system to follow, even for me!

There is no reason that one couldn't be built!

 

[jambx]

I could swear I read that most of the three point hitch could be left on while the backhoe is mounted. Is this true and what stays/what goes? I dont see any way to keep from taking the whole thing off each time. Also I miss my BXpanded backhoe dolly. The BH65 takes up some space with the stabilizers down.

I am very very sure most of the 3pt has to come off. I dont see any other way around it. The only piece that I leave behind is the pin that goes through the rear frame. As for the BH65 - I store it with the stabilizers up (bungie them together) however I have to make a dolly. Its a real PIA when i want to just move it out of the way