Mowing B2620 and RCK54-29B

[sandyc]

Just sprung for the mower yesterday and am hoping the installation is not too much trouble as I have a back hoe subframe installed and also need to be able to install the subframe for the blower/plow in the winter. I am hoping that I don't have to remove the mower attachments this fall in order to put on the front subframe. Anyone have any guidance? Dealer is supposed to drop of the mower and hardware about mid-week.

 

[fredhargis]

This may be no, or very little, help. I have a 2920/BH/60" mower, and the FEL (no front blower). It looks like the front most bracket for the deck could be a problem with a blower (unless they share it in some way). It also looks like if it had to come off it's a 6 bolt job, so shouldn't be too bad. But the mid mount deck hangers on mine are part of the FEL sub frame, without that there appears to be (according to the manual) some bolt-ons (2) that handle that mid mount arrangement and they would interfere with anything. I can tell you this: the BH subframe makes attaching the mower deck PTO about 3 times as hard as it would be otherwise.