Assembly Info for 3-Point hitch - X485

[JohnnyTractor]

I'm interested in adding a rear pto and 3ph to my x485. anyone know what the part numbers are? I can't find anything on the deere web site.

 

[wolfe1]

I would post this over at weekend freedom machines - lots of X485 owners over there and full of info- and they have a very ood source for a cat 1 3 point that is more afforacable than the Deere - what will you run off the rear PTO?

 

[tdurham]

I would post this over at weekend freedom machines - lots of X485 owners over there and full of info- and they have a very ood source for a cat 1 3 point that is more afforacable than the Deere - what will you run off the rear PTO?

I tried that forum but unfortunately it is almost impossible to navigate. I too am wanting to add a 3ph to my X485. I have to believe there are some decent ones on the market at a great price. Any specific info on where to get one would be fully appreciated

 

[tdurham]

I found this 3 point hitch but it is "generic". I am wondering if anyone here might have used this? Any thoughts?

3 Point Hitch Kit: CAT-0 -- 3 Piont Hitch Kits

the price seems good if I can make it work.

 

[r8nger]

It's cheap, but you don't have half the parts you need to make it work. You need all the rockshaft parts and bushings to mount to the frame, plus the lift cylinder relocating kit.This isn't the place to try and save a buck.It is all crammed in tight, like someone else said " engineered""
Just remember, I warned you!!!

 

[CHDinCT]

Here's a link to where I bought an aftermarket 3PH for my old X485. I belive JDtank called Ruegg and they don't offer one for the newer X7xx series. I didn't think anything changed on the newer X7's but I guess something did. Of course the other alternative is the JD version.

Ruegg MFG LLC