Anyone installed Grab Hooks on a FL7 Loader

   / Anyone installed Grab Hooks on a FL7 Loader #1  

slingha

Member
Joined
Feb 24, 2014
Messages
26
Location
Chester
Tractor
Bobcat
Has anyone installed grab hooks on the FL7 Loader bucket? There's not enough "lip" on the top and looking for suggestions. Thanks!
 
   / Anyone installed Grab Hooks on a FL7 Loader #2  
Dont know the loader you are talking about,---BUT on the buckets that I put hooks on for guys I weld a very heavy angle iron ( 4" x 4" x 1/4") across the top of the bucket so they dont tear the light bucket tops up then ***** at me cause the first thing they do is try to lift the back end of a D-10 cat and you know what happens to the bucket without the bar across the top.
look yours over and see if this will work on yours.
 

Tractor & Equipment Auctions

71065 (A49346)
71065 (A49346)
KSI Conveyor (A51039)
KSI Conveyor (A51039)
2011 KENWORTH T800 (A50854)
2011 KENWORTH T800...
2018 International WorkStar 7400 T/A Dump Truck (A50323)
2018 International...
2014 Chevrolet Equinox (A50324)
2014 Chevrolet...
2022 ONYX RX34 FLOOR SWEEPER (A50458)
2022 ONYX RX34...
 
Top