anyone buy mahindra ROPS lights or install any work lights

[heavy hammer]

I'm looking for some work light for my 2540 any suggestions. I checked out the mahindra lights does anyone have a set of their ROPS lights?

 

[RNeumann]

Lots of them out there. These days the LED lights are the way to go. Amazon or someplace else that has multiple reviews would be best since their are so many and the quality is all over the map. Check out the customization or projects section of TBN- their have been several write ups.

 

[airbiscuit]

I had Halogen work lights on my ROPS and replaced them with these LEDs. -Less than $10 each. What a difference!

https://www.amazon.com/gp/product/B00NIHOZY4/ref=ppx_yo_dt_b_asin_title_o06__o00_s00?ie=UTF8&psc=1

Here is one of each mounted

 

[heavy hammer]

looks good a big difference.

 

[4570Man]

Lots of them out there. These days the LED lights are the way to go. Amazon or someplace else that has multiple reviews would be best since their are so many and the quality is all over the map. Check out the customization or projects section of TBN- their have been several write ups.

I have a really cheap pair on the back of my truck that have survived 2 years of dirt, water, and diesel exhaust. The biggest difference I find between the cheap ones and more expensive ones is the quality of the light coverage.

 

[airbiscuit]

There's a good chance there's a an unused power plug for work lights under your seat.

 

[KarTek]

I'm interested in installing a couple of those thin bar style LED lights, one front, one rear. I'd love to hear if anyone has had good luck with any particular brand.

 

[4570Man]

I’ve had a 120 watt bar that was like $30 on my tractor for a year or so. It throws a lot of light and the light spread is pretty good although not as good as some higher dollar bars. I bought another one of the same for my lawnmower this time it’s mounted with magnets for quick removal and storage below the seat.

 

[JerryK]

I have put LED lights on all three of my Mahindri. One thing I learned is that the stock stainless brackets they ship with the lights do not hold up in the real world use of a tractor. I make new brackets out of 1/8" stainless and replace the ones that come with it. Most of the stock brackets crack near where the ' bolt head anti-turn ' is stamped into them and eventually fail. Not hitting the light on anything, just the weight of the light stressing the stock bracket.

 

[mikeman1]

Hi, i did couple videos last year or so on what i did for my 2555. 'allthingsdiy mike' on youtube. well worth the effort to put LEDs on.