All the luck

   / All the luck #1  

MESSMAKER

Veteran Member
Joined
May 19, 2009
Messages
2,231
Location
Bluegrass,KY
Tractor
DK4710SE
The hood on my 4710 failed to shut after a radiator cleaning. Looks like two broken bushing mounts and a bent hydraulic support cylinder. The good news is my warranty ended the middle of June.
 
   / All the luck #3  
Try crossing some poison ivy and a four leaf clover...you'll get a rash of good luck...!
 
   / All the luck #4  
Those supports might be a generic part? Study the ends, diameter and OAL?
 
   / All the luck #5  
The hood on my 4710 failed to shut after a radiator cleaning. Looks like two broken bushing mounts and a bent hydraulic support cylinder. The good news is my warranty ended the middle of June.

Do you mean the gas spring that holds the hood up? Getting a replacement from McMaster will probably be cheaper than OEM.
 
   / All the luck #6  
Have you talked to your dealer? Sometimes they will comp something relatively minor this close to being out of warranty. Some will do it out of "good will".
 
   / All the luck #7  
Do you mean the gas spring that holds the hood up? Getting a replacement from McMaster will probably be cheaper than OEM.
Like I said...
In building wrecked cars I often bought generic struts for hoods or robbed them off of salvage vehicles. I also traded plastic ends around to repair them. Salvage yards don't inventory items like that but can be pricey bought as OE parts.
 
   / All the luck
  • Thread Starter
#8  
I am at their mercy. I do some commercial mowing and it rained 9 days in June.I am about a week behind. Time is money. i just need it fixed ASAP.
 
   / All the luck
  • Thread Starter
#9  
Got the hood fixed. Took it to the next job. Hit a chunk of concrete and knocked a hole in the oil pan. It was at the bottom of a steep hill so I had to winch it to the top of the hill with a standard wrecker so I could load it on a rollback. It has been quite a couple of weeks.
 
   / All the luck
  • Thread Starter
#10  
Got it back with a shiny new oil pan. The hydro system is acting screwy now. Will this Hell never end?
 
Last edited:
   / All the luck #12  
Change your username! Need to lift that curse!

I named our farm Scattered Eggs Farm and, well, you probably can guess how that's gone! (I'm to old for Easter egg hunts!)
 
   / All the luck
  • Thread Starter
#13  
Might be as simple as checking the Oil level? Dutchy
I checked it, but must have read it wrong the first time.. A bit of fluid and it seems fine. Another example of looking for the complex and overlooking the simple.
 
   / All the luck #14  
I checked it, but must have read it wrong the first time.. A bit of fluid and it seems fine. Another example of looking for the complex and overlooking the simple.
Humans have the tendency to look at worst case scenarios.
I hear ya on the bad luck. I always joke that hay balers and snow removal equipment have “panic sensors” built into them. When the operator is ready to make some hay or plow some snow, the “panic sensor” makes the hay baler or snowplow break. Lol
 

Tractor & Equipment Auctions

2023 FORD F-150 XL CREW CAB TRUCK (A59823)
2023 FORD F-150 XL...
John Deere 6110M (A60462)
John Deere 6110M...
John Deere 5075E (A53317)
John Deere 5075E...
2019 Yongfu Scooter (A59231)
2019 Yongfu...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2022 Greenworks CU400W Commercial Work Utility Vehicle DEMO UNIT (A56438)
2022 Greenworks...
 
Top