adding to YM200 hydraulics - need diagram

[MVHF]

I am adding a loader to my ym2000 and need to plumb in a return from the power beyond on my control valve.
Can someone recommend a source for diagrams of the ym2000 hydraulics that might reveal the best location for a low pressure return line?

thanks

 

[HoyeTractor]

Most people just splice directly into the high presure line. It is the method recommended by Koyker on most of their loader kits. You can see a diagram here-->

http://yanmarowners.com/YANMARLOADER.htm

Aaron
Parts@HoyeTractor.com
(940)438-0386

 

[MVHF]

The method they describe is how I first installed the valve and the valve started leaking on the intake side. I asked around and was told that was due to pressure build up when I used my 3-point. I was told that most factory installations use a valve fitted with power beyond to avoid this situation.
the power beyond valve requires a low pressure return as well as the pass through high pressure connection as shown in the diagram at http://yanmarowners.com/YANMARLOADER.htm.

 

[HoyeTractor]

What brand of loader are you using? It could be that some valves are not designed to be used this way.


Aaron
Parts@HoyeTractor.com
(940)438-0386

 

[MVHF]

It's a home grown loader. The valve I was using was something I found on the net. couldn't make out the brand. Since then I've purchased a new Prince valve that is power beyond capable.