gilbert smith
New member
I changed both fuel filters and now it wont start. The fuel valves are turned back on. Has fuel from the motor filter just wont go into the injector lines. Any info would really help thanks
970 JD wont start
- Thread starter gilbert smith
- Start date
- Views: 3287
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Did you fill the fuel filter canisters? Sounds like it might be air blocked.
The 970 is, IIRC, autobleeding, so it should start.
The 970 is, IIRC, autobleeding, so it should start.
OP
gilbert smith
New member
Thank you for the response. There is fuel in the filter canisters. filled right to the top. we did that with the little lever. We unscrewed the bolt a tad where the hose comes out the front filter and there is fuel squirting out that when we use the lever. It just doesn't go above that into the steel injector lines that go to the motor. I wouldn't be surprised if there is an air blockage some how. just dont know how to fix it. Sure don't want to take it to the John Deere dealer $$$
JimRB
Veteran Member
MY JD 870, 970,1070 manual states that the system is autobleeding like Roy said. But there is a fuel pump with a pump lever underneath the injector pump. As near as I can see it is there to suck fuel through the injector pump and pump it back to the fuel tank. Or you could do like I do when changing filters on my VW diesel. You attach a vacuum pump to the return line from the injector pump and suck the air our of the injector pump. That should be the function of the round pump with lever underneath the injector pump.
Hopefully the vague image uploads.
Hopefully the vague image uploads.JimRB
Veteran Member
If you make that image larger I tried to circle the round post fuel injector distributor pump with lever that is there to help manually prime the pump.
JimRB
Veteran Member
Yours may not have that same pump with lever. 
Egon
Epic Contributor
If you have the priming pump spend more time pumping the lever.
Next step is to break a line on the downstream side of the pump.
Next step is to break a line on the downstream side of the pump.
Briana03
Elite Member
Welcome to TractorByNet!
I moved your thread to the John Deere Owning & Operating forum.
I moved your thread to the John Deere Owning & Operating forum.
grsthegreat
Super Star Member
on my old 870 i had the manual fuel prime lever as described previously. just keep on pumping it.
My wife ran the tractor out of fuel a few times, and using this prime pump was the only way i ever got it started again
My wife ran the tractor out of fuel a few times, and using this prime pump was the only way i ever got it started again
