660 baler

[ks oldtimer]

I have a new holland 660 net wrap baler that I was using yesterday and today. Today the pickup stopped moving. I pulled the cover off and removed the chain thinking it was a bearing. The bearing seems fine, but the pickup will only move about an eighth of a turn in both directions. It seems to be hanging up on something but I can not see anything. Any ideas would be greatly appreciated as I still have hay on the ground.

 

[Jerry/MT]

I have a new holland 660 net wrap baler that I was using yesterday and today. Today the pickup stopped moving. I pulled the cover off and removed the chain thinking it was a bearing. The bearing seems fine, but the pickup will only move about an eighth of a turn in both directions. It seems to be hanging up on something but I can not see anything. Any ideas would be greatly appreciated as I still have hay on the ground.

Go to the Hay talk forum and look for info in the stickies at the begining by Mike10 at the beginning of the Machinery Forum. Mike10 worked on New Holland stuff since dirt was invented.

 

[ks oldtimer]

Thank for this information. I will check it our.