6410 Park / Neutral Switch

   / 6410 Park / Neutral Switch #1  

bub6410

New member
Joined
Aug 6, 2014
Messages
1
Location
Cynthiana, KY
Tractor
JD 6410, JD 2020, JD X475, JD x485, JD 345
I have a 6410 that quit going forward and reverse. I changed the power reverse unit and have a new park / neutral switch to install, not sure how to wire it up since new switch has different color wires. Checked all solenoids on the tranny already, checked good. Can never get voltage on either the forward or reverse solenoid. Will have voltage on the enable solenoid until i move the shuttle in either direction then the voltage drops out. Thinking that my wiring of the switch is causing this, but have tried different wiring scenarios. Checked fluid pressure (150 psi) and pressure switch. When shuttle lever is moved to either position it just beeps. Any suggestions please.
 
   / 6410 Park / Neutral Switch #2  
The park neutral switch is to allow the tractor to start. There is another thread in JD AG tractors about a 6410 with the same problem. Tuned out to be a bad relay.
 
   / 6410 Park / Neutral Switch #3  
im having same problem. what did you have too do to fix it
 

Tractor & Equipment Auctions

2014 Ram 1500 4x4 Crew Cab Pickup Truck (A53422)
2014 Ram 1500 4x4...
2018 Chevrolet Camaro 1LT Coupe (A51694)
2018 Chevrolet...
Flat Bed (A52377)
Flat Bed (A52377)
V.E. ENTERPRISES 500 BBL FRAC TANK (A53843)
V.E. ENTERPRISES...
2008 PETERBILT 367 HOT OIL UNIT (A53843)
2008 PETERBILT 367...
1998 National RV Tropi-Cal T/A 35FT Class A Motorhome (A51694)
1998 National RV...
 
Top