Comparison 5600 with post driver/pounder

   / 5600 with post driver/pounder #1  

Trebsdub

New member
Joined
Apr 11, 2018
Messages
5
Location
Stevens point
Tractor
Bobcat 5600 Tool cat
Hello all. Thinking on putting my shaver post pounder/driver on my toolcat. Has anyone used one on their toolcat and if so how did it work? Dont know if it will have a sheer weight to do it and want to make sure it will work without damaging my 2019 unit since I just bought a new one after having 2 older ones in the past. Thanks
 
   / 5600 with post driver/pounder #2  
I rented a post driver last summer and drove probably 75 or so 5 inch diameter posts. It the Toolcat would have a vertical lift path would have mad it work a little better. I was by myself and I had a few post leaning a little . I needed to back up some as post drove down. The one I rented was a Bradco. Work well enough for my I’m thinking of buying a Danuser.
 
   / 5600 with post driver/pounder #3  
I was wondering about the arc the loader takes and how it hinders driving posts. I wonder if a hanging chain near the post to act as a plumb bob would help SEE the situation better.
 
   / 5600 with post driver/pounder #4  

Not best video. Poubing 5” post with Toolcat 5610 and Bradco driver. Can see everything jarred when pounder hit end of stroke and I had to drop it lower.
 

Tractor & Equipment Auctions

2025 LandHonor LHR-DFP10 Diesel Fuel Transfer Pump with Hose Reel (A49461)
2025 LandHonor...
2023 KAWASAKI MULE (A51243)
2023 KAWASAKI MULE...
2015 Chevrolet Silverado (A50323)
2015 Chevrolet...
4 1/2 150G DRILL STEM 358 JOINTS (A50854)
4 1/2 150G DRILL...
2016 J&M 1122-20T X-Tended Grain Cart (A50657)
2016 J&M 1122-20T...
2024 Case IH Magnum 380AFS CVX Connect MFWD Tractor (A50657)
2024 Case IH...
 
Top