5075E 400 hour review

[Soggy Bottom Outdoors]

Im trying to attach a couple pics of the dash to further explain my point. As you can see the the rpm mark for 540 pto is at 2400 engine rpm. Not 2450 as I thought. It will do that plus a little. If it will calm your nerves I can get one of tractor running 2450 rpm. This tractor is a 2013 base model pre-emissions.This conversation has taken a sour note. Assuming or insinuating that I know little about my tractor or that I’m lying is not helpful. I began this thread to review the machine and to provide insight to those who may look to purchase one not to be on the firing line. Thanks.

 

[beenthere]

SBO
I don't see any "sour note" in the thread. Nor anything insinuating that you know little about your tractor. Keep calm.. you started a good thread about the 5075E.

 

[Tx Jim]

SBO
I don't see any "sour note" in the thread. Nor anything insinuating that you know little about your tractor. Keep calm.. you started a good thread about the 5075E.

I agree. I guess it gets back to the fact that opinions are similar to navels because everybody has ONE!

 

[Brown Dog]

Maybe I was confused

I know my 4cyl JD’s turns 2600 range & remember the 5075E 3cyl wouldn’t turn as many engine rpm.

So maybe the 75E will turn 2400rpm.

 

[Soggy Bottom Outdoors]

Good to here from you Brown Dog. The little engine is really hammering at that RPM but after 665 or so hours I've not seen a problem. No overheating, no oil usage, no excessive fuel use.