4410 delivered (only for 1 day)

[Anonymous Poster]

Ordered the 4410 in January and had it delivered on the 13th of March. It was here earlier but I was working up north for 6 weeks so it had to wait for me.
Here's the skinny.
4410 w/ eHydro, cruise upgrade, SpeedMatch
Heavy duty alternater
430 Loader w/4in1 Bucket
72 in Mid Mount Mower
Telescoping draft links
Top & Tilt
All the Hydraulics and deverters to run these things

On delivery day it was raniy and windy and cold so my delivery inspection was short and sweet. You can probably see where this is going. Actually everything worked except the MMM. Book in my hand, following all the steps engage mid PTO... nothing. Anyway.. dealer says factory forgot some kind of relay for the mid PTO and somehow this got overlooked in the confusion of putting all the other equipment on the machine. First time they ever had a 4000 ten series with 4in1 bucket and top&tilt and MMM, all hydraulicly operated. Anyway they picked it up yesterday. Should be ready by Tuesday. Since they have the tractor I told them to install a bucket level indicator ($35) and I ordered a tooth bar from Carver equip (59 1/4 inch inside diameter for $235 delivery UPS $35)
I'm going to try to add some pictures.

 

[Anonymous Poster]

I give up. I've reduced the size to 320 x 240 and its still too big.

Help.

 

[beenthere]

Welcome to the forum

That sounds like a great package but am sure disappointed in hearing that the dealer didn't check out the operation of the MMM before delivery (let alone it came from the factory that way). But &#*$ happens in every walk of life.

What attachments do you plan to add to make use of the top n tilt?

 

[NY_Yankees_Fan]

Jim,

Go to this website and click on download. It is a FREE program that you can reduce the size of the picture. Then post a few pictures of your new tractor /forums/images/graemlins/grin.gif

web page

 

[Anonymous Poster]

I must be doing something wrong. I've seen other pictures posted that are larger than the 320x240 picture I'm trying to post. I can make the picture any size I want, but if I go much smaller it will end up looking like a thumbnail.
Here's what I'm doing.
I post my message then after i send it I "repy" to that message and in the review section I insert the picture location. Everything looks like its working for a while then I get the message that the post is larger than 100000 bytes.

 

[mopar]

i just went through the same thing this morning trying to post my first picture.the picture looks really small in resize program but comes up nice on the board/heres what i did:i would make it smaller then right click on the picture and then look at the properties,that gave me a byte count,as soon as it was under the min.for the board it worked for me,the picture show's small on my computer in the resize program but when i go back and look at my attachment on the post it is good size.i'll attach the picture i did this morning of our new 4310 waiting at the dealer to come home to us,again on my resize program it looks like a thumbnail but not on here,hope this helps as it took my about 30 tries to figure it out /forums/images/graemlins/smile.gif

 

[Anonymous Poster]

Thanks Mopar. I went to 210x---.
This is after moving some mulch.

 

[Anonymous Poster]

This is better

 

[NY_Yankees_Fan]

Jim,

Looks GREAT /forums/images/graemlins/grin.gif

Regards

 

[mopar]

/forums/images/graemlins/cool.gifyou got the pictures to work,is that the 4 in 1 bucket on your loader?i've never seen one