3D Printed Parts for our machines on the YTOG

   / 3D Printed Parts for our machines on the YTOG #1  

bmaverick

Super Member
Joined
Sep 17, 2013
Messages
5,621
Location
Beloit-WI
Tractor
Yanmar YM2610 ■YANMAR GURU■ EXTRAORDINAIRE
The YTOG is getting ready to provide storage for 3D Printed Parts on the site. A few people in our community have stepped forward making this possible. We hope in time to have more items available. And like always, free is best.

The Y-Emblem, patterned off the original aluminum die-cast.
Original 40yo die-cast
image20.jpeg


3D printed in the matching colors
1723759387118.png


1723759471847.png

1723759494816.png


Gives a fresh look to your workhorse.
1723759527408.png


YM Series round hood side decal
YM Series Circle.jpg
 
   / 3D Printed Parts for our machines on the YTOG #2  
Good to know.
 
   / 3D Printed Parts for our machines on the YTOG #3  
Should work on this Front grill style also. Several different models. With different setups. My2000 Org Nothing. But 2 Bolt holes to screw it to though.

Scroll down. This grill is rare. I've only seen A couple times.
My 2 bolts holes are sideways/Vertical.
Those are Horizontal and Triangular so My guess Zen Noh ?
 
Last edited:
   / 3D Printed Parts for our machines on the YTOG #4  
That’s awesome. Two thumbs up.
 
   / 3D Printed Parts for our machines on the YTOG #5  
Decades of changes for the Org. Yanmar but I'm sure Zen-Noh.
 
   / 3D Printed Parts for our machines on the YTOG
  • Thread Starter
#6  
FreeCAD shows the parts very clearly.

1723949933894.png
 
   / 3D Printed Parts for our machines on the YTOG
  • Thread Starter
#7  
OK, we just went live with it. This is the first for the Yanmar community.
 
   / 3D Printed Parts for our machines on the YTOG #9  
Yanmar USA. is what I say.
 
   / 3D Printed Parts for our machines on the YTOG
  • Thread Starter
#10  
Why by really cheap looking stickers that will curl and peel off after a few summers due to heat? I see these sold in several Ag places online.

1725154173206.png


1725154210617.png


What if you could just remake the original . . . . and better than new,

20240818_105256.jpg


Yes, with 3D Printed hood side model emblems. Not cheesy looking silly stickers!

1725160101843.png
 

Tractor & Equipment Auctions

2019 Chevrolet Express 2500 Cargo Van (A46683)
2019 Chevrolet...
2013 KENWORTH T800 (INOPERABLE) (A48992)
2013 KENWORTH T800...
Golf Cart (A48082)
Golf Cart (A48082)
78in Buckets (A49251)
78in Buckets (A49251)
300 Gallon Tote (A49251)
300 Gallon Tote...
Mayrath 8x62 Swing Away Auger (A49339)
Mayrath 8x62 Swing...
 
Top