2305 Bucket Control

[Curly69]

Bought my new bucket control about 6 months ago and now have to install it.
Can anyone give me the bolt tightening pattern and the torque I would be thankful.

 

[beenthere]

You have been pretty shy on information, after reading back in your other posts. Not sure what "tightening pattern" you need or torque numbers. Get a photo posted on your "new bucket control" that you have to install. That would be a place to start.
Also, where did you get the control? Not important, but would help to answer your question.

 

[Gator6x4]

I don’t think an attempt to install the bucket control lever should be tried without the service technical manual for the 2305.

https://www.google.com/search?q=jd+2305+cd+technical+manual&ie=UTF-8&oe=UTF-8&hl=en-us&client=safari

 

[Curly69]

You have been pretty shy on information, after reading back in your other posts. Not sure what "tightening pattern" you need or torque numbers. Get a photo posted on your "new bucket control" that you have to install. That would be a place to start.
Also, where did you get the control? Not important, but would help to answer your question.

OK I thought there were more than the 2 bolts so I figure pattern don't matter.
So I was looking for the torque for the 2 bolts.
I bought it in Spartanbugh SC. There is really only one JD dealer here in western NC and they get away with charging ya double what list price is for any part. I gladly drive an hour to safe $600.00.