1710 Ford auxiliary hydraulic taps

[rebelyank]

Hello, new to site. I have an 86 Ford 1710 without draft control, with a 770 loader. I have a Fisher power angle plow mounted in the bucket and the Fisher valve body mounted to control the power angle but am now stuck as to where to tap in the hydraulic feed & return hoses on the tractor. I have a lot of mechanical experience but not much with hydraulics so any guidance would be greatly appreciated.

 

[K5lwq]

Hello, new to site. I have an 86 Ford 1710 without draft control, with a 770 loader. I have a Fisher power angle plow mounted in the bucket and the Fisher valve body mounted to control the power angle but am now stuck as to where to tap in the hydraulic feed & return hoses on the tractor. I have a lot of mechanical experience but not much with hydraulics so any guidance would be greatly appreciated.

Welcome to TBN. I am not completely sure on the 1710 but believe you should have a power beyond line coming from the loader valve that goes back to feed the rest of the system. This would be your line in on your valve body. You will need power beyond out of the valve body to run the rest of your system. There should also be a out labeled T for tank that needs to be tee'd in with the tank return from your loader valve. Pictures are always helpful but hope that gets you started. Good luck and Happy New Year!

 

[Xfaxman]

I haven't done it, but there have been many threads on doing this.

Do a search:

Maybe someone that has done it will see your thread.