1533 50 hour service cost

[eflyersteve]

I'm within 3-4 hours of my 50 hour service on my new 1533 so stopped by Wally-World to get some Rotella T oil for the engine ($12.73/gallon) and then stopped by the dealer to purchase the remainder of the items needed: engine oil filter, hydraulic filter, fuel filter, fuel pre-filter and hydraulic fluid for the front axle change. I was a bit surprised at the cost of these materials - $328.77 before tax! Of that, the fuel filter was the bulk of the cost, coming in at $187.46.

Anyone else think the prices for a handful of filters and 2 gallons of hydraulic oil are a little on the pricey side? I'm sure going to see if I can cross reference that fuel filter.

 

[eflyersteve]

Well after looking at some diagrams that I found on the web, it looks like I was charged for the complete filter assembly instead of the $85 filter element. I haven't picked them up yet so I'll have to point that out to them unless someone here thinks I need the entire assembly.

 

[oldpilgrim]

the fuel filter is about 8 bucks for my 3016.

 

[Wagtail]

What!??? I'm not suggesting that that isn't the price your dealer charged you for an OEM filter but, CRICKEY!

An OEM fuel filter for my 4105 (Yanmar donk) is under A$15. And my first service was at the 200hr mark.

I had a look at TractorData.com and couldn't locate the 1533, so it must be a very new model.

 

[eflyersteve]

This is the same filter used on the 3016 and 3616. Not the pre-filter but the second filter. Where can I get one for $8? I'll buy a case!

EDIT -

I stand corrected - the pre-filter is the only thing they share in common but the New 4 cyl adds a bosch common rail filter after. Either way, the dealer owes me about $100 I think.

 

[eflyersteve]

What!??? I'm not suggesting that that isn't the price your dealer charged you for an OEM filter but, CRICKEY!

An OEM fuel filter for my 4105 (Yanmar donk) is under A$15. And my first service was at the 200hr mark.

I had a look at TractorData.com and couldn't locate the 1533, so it must be a very new model.

It is a new model but basically a 4 cylinder version of the 3616.

 

[Navasot]

http://parts.mahindrausa.com/epcview/illustrationview.aspx

Here the part number you need

 

[Navasot]

Sorry it didn't highlight it.... its number 3

 

[Navasot]

This is a completely different engine than what was in the 3016-3616.. and also a new style tractor as well.. welcome to T4

 

[eflyersteve]

This is a completely different engine than what was in the 3016-3616.. and also a new style tractor as well.. welcome to T4

Yes, new 4 cyl tier 4 engine vs the 3 cyl. Been very happy with it and have no problems with it being tier 4 other than the extra fuel filter cost. I really think this new engine is under less stress than the 3616 it replaces.

Called dealer and he has the correct part numbers. Saved me about $130.