1517 Loader cylinder question

[badboyrcg70]

Can anyone tell me what the bore size and length(extended and retracted) was on the 1517 loader cylinders.
I need to find a suitable replacement.

 

[badboyrcg70]

I am thinking one of these 3 would work as a replacement and not be too big to hurt the tractor.
Any opinions?
Also one of the 2 valves listed should work as well.

Cylinders
http://www.northerntool.com/shop/tools/product_200511837_200511837
http://www.northerntool.com/shop/tools/product_25613_25613
http://www.northerntool.com/shop/tools/product_23489_23489

Valves
http://www.northerntool.com/shop/tools/product_200638935_200638935
Brand Hydraulics Monoblock Loader Valve, Model# PLV22TSTKAB | Control Valves| Northern Tool + Equipment

 

[suntreemcanic]

I have a TX 1500F (G174) it is a 17 horsepower weighs 1146 pounds. It has a Brantly loader 500 pound lift capacity it weighs 316 pounds, it has the 48 inch bucket. The bucket cylinders are 16" x 2" with a 1 1/8" piston rod. The boom cylinders are 22 1/2" x 2" with 1 1/8 piston rod. Its operating pressure is 900 PSI. All this information came from my Brantly operation and maintenance manual. As for the valve there is little information in the manual, I know it has a float position but I would have to move it out of the shop and then I could get a brand name and part number. Hope this helps

 

[badboyrcg70]

I also found this one for a lot cheaper. I have been thinking the float option would be useful even for the added expense.

Amazon.com: Mighty Double Acting Hydraulic Welded Cylinder, Tube Cross - 1.5" Bore x 12" Stroke: Home Improvement