12 x 12 SynchroShuttle, 12 x 12 DynaQPS

   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #1  

Gary Fowler

Super Star Member
Joined
Jun 23, 2008
Messages
11,917
Location
Bismarck Arkansas
Tractor
2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Does anyone know what the difference is between the new DynaQPS system and the synchroshuttle as offered on the 1600 series tractors that are now advertized.
 
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #2  
Syncroshuttle is your basic, push in the clutch to change direction, shuttle. The QPS is a power shuttle with a 4-speed, electric, power shift.
 
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #3  
Syncroshuttle is your basic, push in the clutch to change direction, shuttle. The QPS is a power shuttle with a 4-speed, electric, power shift.

On the 12x12 sync shuttle, do you have to clutch to change gears too? And direction also?? And ranges??

Do all 1600 series have the Ferguson system?(Draft control?) Our 1523 does not.


 
Last edited:
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #4  
Yes, Sync shuttle needs the clutch. It's a cheaper way to get the tractors. In the Sync shuttle version, it should be an 8 speed. The 12 Speeds are power shuttles. The compacts don't have the Ferguson system, but you can get draft control.
 
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #5  
Yes, Sync shuttle needs the clutch. It's a cheaper way to get the tractors. In the Sync shuttle version, it should be an 8 speed. The 12 Speeds are power shuttles. The compacts don't have the Ferguson system, but you can get draft control.


Thanks for the correction. On the 12x12 Powershuttle, do you need to clutch to change gears and change direction with the shuttle?

Is draft control standard on the 1600 series??
 
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #6  
Clutch just to change gears/ranges. Forward-Reverse w/out. I think draft is an option on all 1600's except the 1660, it's standard on it.
 
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #7  
for what its worth, on the DynaQPS you only need to use the clutch pedal to change ranges. Gear changes and directional change does not require using the clutch
 
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #8  
Clutch just to change gears/ranges. Forward-Reverse w/out. I think draft is an option on all 1600's except the 1660, it's standard on it.

Don't get confused here there is a SynchroShuttle and a PowerShuttle

SynchroShuttle needs a clutch to change forward and reverse and PowerShuttle does not need a clutch.
 
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS #9  
Right, WilliamBos asked about the Powershuttle. I should have specified that was the P/S.
 
   / 12 x 12 SynchroShuttle, 12 x 12 DynaQPS
  • Thread Starter
#10  
From what I read on the webpages, the powershift QPS is only available on Cab models. Does anyone know if it can be ordered on non cab models?
 

Tractor & Equipment Auctions

2006 John Deere 4120 Tractor (A51573)
2006 John Deere...
Schwing 750-15 Concrete Pump (A51573)
Schwing 750-15...
BUSH HOG 2810CD SINGLE FLEX WING ROTARY MOWER (A51406)
BUSH HOG 2810CD...
SCHAFFER 2430SLT LOT NUMBER 150 (A53084)
SCHAFFER 2430SLT...
NEW Slip On Fork Extensions (A53002)
NEW Slip On Fork...
GALAXY - SET OF 19.5L-24 INDUSTRIAL R4 TIRES (50% TREAD) (A53472)
GALAXY - SET OF...
 
Top