shibaura sd2200

I have an old Shibaura SD2200 that I'm trying to keep alive. I have found that it pretty much lines up with a Ford 1600, which I use for a repair guide. It has a Bulldog 285 front loader, which unfortunately is starting to act up. Need some recommendations on where to find hydraulic seal kits...

Looking for the head bolt torque specs for a shibaura sd2200 or ford 1500 tractor, Also I need to know what the valve lash should be set at, thanks

I was mowing the other day and it got bogged down just a bit and eventually lost power. Upon trying to restart I couldn't get it started, it would turn over and puff alot of black thick smoke but just wouldn't start. The sound when it tried to start was normal but after about 10 seconds of...

All, I have the above tractor and need the sway control parts to prevent my 3 point bars from swinging causing the implements to hit the tires. Messicks has the parts but are really expensive. Has anyone bought these elsewhere without breaking the bank? the part highlighted in Yellow is what...

I have a SD2200 and it appears the temperature guage is broke....actually I don't even think it is attached to the sending unit. I just bought this tractor last week and would like to put a gauge on it. Will one of the universal ones from Tractor Supply work or are the thread patterns not NPT...

I'm having an issue with my Shibaura SD2200 with a 4-foot shredder. If I run more than an hour and a half my 3-point hitch starts losing lift. The temperaure indicator reads around 230 when this happens. In my mind, I think a tractor should be able to work for more than a couple of hours. Is...

does anyone have a picture of the timing marks for the injection pump sprocket to idle sprocket? When i align all the marks up there isn't one for the injection pump. please help. thanks Casey

Hi... I have a Shibaura sd2200 tractor and am looking for a starter.....does anyone have a picture of a starter that will work on this tractor...or any info on model nbr/info to obtain the proper starter.....thanks, Bill

I was out looking for a smaller tractor to work my food plots with and ran across one that I am not considering buying, but couldn't believe what was done to it. It is an older SD 2200 4x4 and looks to be in good shape. The owner says he bought it about 3 years ago and hasn't had any trouble...

I have a friend who has a Shibaura SD2200 with about 660 hours on the proofmeter. The tractor also has a 60 in. RFM and 60 in. KK boxblade. The RFM has recently had the three spindles replaced and it is a J-Bar brand made in Georgia. Of course, I know what he wants for this tractor, but I'm...

I am looking for a ROPS and lid to fit my SD2200 4X4 Tractor. Could someone help me find one or steer me in the right direction? Thank you in advance. Jim Bonham 864-647-9810 bsm357@aol.com

greym-ML-703073-ML- Brand specific. Moved to the Grey Market Tractors Forum.

Just curious if the tire size and wheel size are correct on the tractor I purchased. The Rear Tires that came on it when I purchased are 11.2 X 24 The Front Tires that came on it when I purchased are 6.00 X 14 I was told today that if the sizes are not correct that it would tear up the...