plow

Hi all, new to the forum and was hoping to get some help with ID'ing a MM Plow that was bought from the City of New York by a car dealership in Brooklyn and found it's way to a farm in PA. To the best of my knowledge it was a 1950's era machine that was one of maybe 150 units custom ordered by...

I'm building my own and stronger, pushframe than the KFI wet noodle design that we got with our outlander. Would anyone here care to see this build?

We're way behind in snowfall this winter and the tracks on the utv weren't really necessary. We got a 8" snow Saturday night and that put it beyond tire duty where it's not been plowed. It was almost knee deep beyond where compacted by the tracks. and to be in thread compliance... Good clean...

Hello, I have a TC30 and recently purchased a Ford New Holland 702C plow. I found an old thread where someone had success mounting this blade to a tc30. But I think I have different brackets. If anyone has any input I'd greatly appreciate it. Pic shows the mounts i have

Yesterday I looked at a 6ft Snowdogg UTV plow that's FS near us. I'd not seen one before and I was rather impressed with its construction. This does have a stainless blade and just the bottom wear edge that trips when you strike something. Its pump, oil tank and valves are in the black box...

I bought this Kioti used and the previous owner included several implements including this snow plow. He didn't have the grapple as I purchased it afterward. The hydraulics are run from one of the 2 rear ports to the loader. When I connected the grapple I experienced a leak in both quick...

looking for some information on this old plow on how the beam and handles should be and also the length of them.. the current beam and wheel (not really sure if the wheel even goes to it)is just a mock up cant seem to find useful information about it

Hi, I have recently bought a Ransomes TS59 3 furrow plough after being told that my Kubota L2421 would comfortably handle it. My tractor has a Cat 1 hitch and I think the plough is probably a Cat 2. If I modify/make an adaptor frame will the tractor plough with it or should I start again? Thanks

Neighbor just gave me this and I can't identify it and he doesn't remember. I've never seen one with the box that the top link connects to. There's a grease zerk up there and a place that might be missing a bolt, so I'm looking for a reference manual for it. Any ideas?

Chisel plow with 3 point hitch; heavy duty implement; 3 rows of plow tines; 7 tines (movable with spring reliefs); points are sharp (not worn). Bought used in good working order. Used once to plow 4 acres. No problem to pull with 50 hp tractor in hard clay soil. Located in Amissville, VA...

I surely would not want to foot the fuel bill this operation willy

I bought an old Bush Hog brand 10 point chisel plow today. The seller lifted it up onto my trailer with his Ford 4000, at an idle. My poor little JD 855 could not lift it whole. It was able to lift an end and drag it off the trailer, without scratching the trailer much. I need to get it...

I ran across these pics today and thought I would share. I was always impressed with what that little tractor could do. BTW, those wheel weights under all the mud fit my Kubota BX2680 perfectly. Dave

Be gentle, this is my first time plowing with my tractor as well as my first time with a fullsize plow. All noob jokes are expected. :) I have an L3560HTC that I've added a 7-foot quick-attach plow to. She looks like this: Yesterday was the first snow and I attempted to use the FEL's "float"...

I have a Kubota L3560 with a 3rd function valve installed and need to plow my ~900 foot driveway. I've already purchased the Artillian system with forks and grapple, so I was looking at their 72" plow option. When I bought my tractor the dealer priced out a Land Pride STB1584 plow and hydraulics...

I recently acquired a 2000 JD 4300 from an elderly neighbor. It came with a 72" plow blade and the skids/feet are pretty worn out and need to be replaced. There are no markings on the plow or the feet and the local JD dealer does not have record of a plow purchase for my neighbor. Shaft OD...

I hope that this thread will continue as others perform maintenance or adjustments on their tractor. Century included. My tractor seemed to be struggling with HP lately. The tractor did not roll on a slight incline as it did in the past. It turns out that the brakes were sticking. I pulled the...