new holland tn65

Yesterday I was bush hogging a hilly pasture and had a brake system failure… luckily I had just reached the bottom of a hill when the anomaly happened! I’m trying to wrap my head around what happened, how to prevent it, and any advice or insight the forum may have to offer. some things about...

I'm trying to sort out my existing hydraulics to add a third function, but I'm in over my head when it comes to equipment hydraulics. I've got a Woods 1020 loader on a New Holland Tn65, the loader valve has 7 hoses on it, four go out the loader arms, of course, to the loader hydraulics. The...

Hi, I've got a TN65 tractor with a hydraulic leak where the metal line from the pump connects to the remote valves via a banjo bolt. I can't tell with certainty, but I'm fairly confident that there's a hairline fracture on the banjo fitting. Assuming that is the case, I'm hoping that I can just...

I have a New Holland tractor TN65. While driving the clutch felt like it was slipping. I started it the next day and it would not go into gear. I put it in forward and as soon as I let out the clutch the Power Shuttle light comes on and flashes code 47. I replaced the clutch potentiometer and...

Hi I have bought a NH TN65V from 2000. It is trying to tell me a error code, think it is 24, followed by 35. It is with the electric controlled lift(3 point hitch). The blinking is on the right fender. Does anyone have the right repair manual? And sharing :-) I did find a repair manual on eBay...

Hi everyone, I have a 2000 new Holland TN65 4wd with a woods loader and a 3rd valve. On Friday, I snapped one of the loader cables on the tractor. Unfortunately you cannot just buy the cable anymore and I had to buy a whole new joystick which came with two cables, $400!! (From my new Holland...

Hi, Saw what appears to be a very good deal on a New Holland 65 HP tractor on CL. Let's assume it's a legit ad (I have not contacted the seller but he had another ad advertising his services with the same tractor). Just seems like a lot of tractor (w/low hours) for the money. Thanks

Hey everyone, does any one know how a new Holland TN hour meter registers? My dash is cracked and the tach needle cannot get above 500rpm. I am going to fix this, but am curious if my hour meter will begin working again. I've read that hour don't start registering until 1000rpm, some say PTO...

Hey everyone, I'm going Saturday to look at a 4WD,2000 NH TN65 with 1600 hours on it with a Woods 1020 loader. My questions are these, what transmission options did this model come with? Whats preferred? I am not sure if its a shuttle or what I can a "left hand" reverser. Anyone have one that...

my Tractor works fine until it gets hot and then the transmission quits working. When it cools off it works fine again. any ideas ?

Hello! I have a '03 New Holland TN65 and the tach and hour meter stopped working. It also appears that the fuel gauge and temp gauge may not be accurate. I had it into a dealer for something unrelated (a 4wd engagement issue) and asked them to look at it. The guy did, got the hour meter going...

Have a New Holland TN65. Had a very small leak and over time the hydraulic fluid went out. Just filled it 2 days prior and thought the small leak would not be a problem. 3 point would not lift my box blade or go down. Had to add 5 gallons of hydraulic but that did not help. It is still not...

My tn 65 has a squealing sound, this started after I changed all the filters and hydraulic oil. It mostly only appears after I use the steering, then when I stop steering 10-20 seconds later the squealing stops as well. I loosened the pressure line from the steering pump and notice foaming oil...

Hello! New member here, just have a question about a boggling mystery my dad has had with his early 2000's NH TN65 tractor not.cuting off with the key. This has been going on for a couple of years. He changed the switch, because the battery kept getting drained overnight. That fixed the dead...

Looking at a 2002 TN65 4x4 tractor with 1600 hrs on it, no loader, and am told everything is mechanically sound on the tractor by the sales staff. This will be my first tractor if I get it, and just wondering what I need to be looking for on these tractors as far as potential problems to stay...

Good evening.. I have a 2002 tn65 that when you shift to forward or reverse engine runs but wont move. you can lock diff and right wheel pulls but left will not pull. any thoughts or suggestions.

I have a 2005 Tn 65. Big upgrade from my 1971 ford 2000. However its difficult for me to grasp the limits of my new holland great deal more horse power than my old ford. But the lack of weight is a big problem. Have anyone had any experience farming with this model tractor? If so any advice...

Tractor will not shift into gear while the engine is on, I am able to put it into gear without it started, but will not engage when engine is running?????????? Help this is my ole man's tractor that I borrowed a couple of weeks ago and everything worked perfectly when I returned it.

:newhere: I have a 2004 New Holland TN65 4WD with 32LA Loader. We have a small topsoil business that we use this tractor for. Great Tractor overall :dance1:!!!! Most small issues we have been able to figure out but now I'm stumped, the 4WD drive will not engage. Anyone have any ideas of...

Now the left front wheel drive is going out. The right front went out last spring. 3700 hours on the tractor. $3500 to have repaired. Do any of you have this same problem?

Good Morning, I have a 2 wheel drive 2001 New Holland TN65 and the opportunity to buy a Bush Hog 2426QT loader. Does anyone Know if this will fit my tractor or where brackets might be available to make it fit many thanks Tim

Moved to NH board

Have new to me used (287 hr) TN65. Was bush hogging some thick privet today and all of a sudden the clutch pedal was up about 6 inches and catching at the very end of the travel. The clutch still feels like it pulls well but the pedal is way out of wack. This a used tractor I have had about a...

1st Try: I have a 2001 NH TN65 4wd with 300 hours that has a very noticeable clicking sound in the drive train. Yesterday I removed the drive shaft to the front axle and the noise was still there, so I ruled-out the carrier bearing and drive shaft. If I shut the motor off and coast down a hill...

I just bought a 03 TN65. Its 2WD with the 8x8 Shuttle transmission. It was used in a dairy but the rust is mostly at the hook up points on the rear and the edge of the rear rims (I am planning on replacing them with a bigger rim anyways so its not a issue for me) I plan on grinding away any rust...

Been looking at the 5x03s for awhile but then along comes a used low-hour NH TN65 2WD in excellent condition. Horsepower-wise a TN65 seems to line up with a 5203. When all features are considered what JD does the NH TN65 best compare to?

built out of stuff I had around the shop, parts from fisher,western snowplows,hyd. cylinder from an old IH corn planter. and some spare time.

I just got a TN65 with cab and it appears everything is set up for a radio in the cab (speakers and antenna) but the box for the radio is empty! What radio will fit in the opening and where can I get one? I heard that only an audiovox will fit the factory connections, but nobody in this area...

Hello, I ran across the link http://www.me.psu.edu/sommer/projects/tractorFY1/ that displays the effects of tractor rollovers and rear overturn. After viewing these..."I'm scared straight".

i see this model for $14,200 in an equipment trader. how does this compare to the Deere 5000 series ? does anyone have this TN 65 at home?

My brother is a mechanic for the local NH dealership, we got togther this weekend for an Easter dinner at Mom's house. The concversation turned to tractors as usual. He mentioned a TN65 that had only 105 hours on it they took in for warrentee work. I saw the tractor this afternoon. The front...

I am trying to decide between a JD5205 MFWD w/JD loader and a NH TN65 MFWD w/NH loader.

My TN65 sans Alo 710 FEL