mf 135

  1. slhilbert

    MF 135 Perkins Gas 3 Cylinder - Power Down After Warm - Won't Restart

    I am having issues with my MF 135 Perkins Gas 3 Cylinder again. The tractor is starting right up and running great as long as it is idling. When I power up and start driving it around, pretty quickly it bogs down and dies, almost like it is starving for fuel. Once this happens you can't start...
  2. T

    Oil bath cleaner MF 135

    I have a Massey Ferguson 135. I took the oil bath filter off it shot. Can’t find another one like it. This one had a glass bowl on the bottom and the hole was at the bottom of the container to go to the carburetor looked all over. Can’t find one that looks like it. Can anybody tell me if these...
  3. T

    MF 135 hydraulic cylinder install

    Newbie question. I have to replace the hydraulic cylinder on my MF135. Question: is there an o-ring that goes between the cylinder housing and the under side of the cover where it bolts up with four bolts? I can't find a parts diagram to answer my question. Thanks
  4. 1

    MF 135 Valve Springs

    Hi, Hoping someone can help...... I have the head off my 1968 MF135, engine is an AD3 152 perkins engine. Going to get it skimmed as it has been blowing bubbles into the coolant. Anyway, I have noticed that the valves are fitted with single springs, all the replacement kits I have found all...
  5. cdupuy

    MF 135 external hydraulics

    I have a diesel MF 135 with no remote hydraulics. I would like to be able to operate a cylinder on a hydraulic box blade. this seems like a light load for hydraulics vs. a front end loader. my question is, will someone recommend a vendor for the conversion kit? the kits i have seen on the...
  6. J

    MF 135 Power steering issues

    Ok, I have a 74 (or 73?) MF 135 orchard. Diesel. A couple weeks ago I was tilling my garden and busted a power steering line on the left side from the piston to one of the fittings under the steering column. Had my hydraulics shop make me a new hose (actually just went ahead and replaced...
  7. slhilbert

    MF 135 - Throttle Issues, Backfires, Power Issue, Dying

    I have been fighting issues with my 3 Cylinder Perkins Gas M-135 for a few years now. I finally broke down and bought a new carb for it a year ago and it has helped. However, I am still having a few issues that I would like smarter people than me to help figure out. When throttling up, it...
Top