massey ferguson 1529

My 2009 MF 1529 was happily working using PTO with a finishing mower when it stopped running like someone turned off the key I attempted to start but it makes the same noise as if it is not in neutral...slight clicking noise and the lights come on in the dash. I checked the fuses and the 10a...

Anyone know the part number? The turnbuckle is fine.

Leak on front axle. Outer case is cracked. Looking photos and parts breakdown. Also how to remove axle.

Has anyone installed a 3rd function to run a grapple? Im getting no help from my dealer.

I have a 2012 massey ferguson 1529. I'll be darned if I can find the front axle Level Check? I know where to fill and drain but for the life of me I cannot find the level check plug. It shows it in this photo but it's not on my tractor.

I have been trying to track down the following problem for about 2 years now... My tractor will start and run but after a few mins or half an hour it will stop... it might start right up or it might take a few times to catch... when I turn the key it will run and when I let go it will stop...

Hello all I have a Massey Ferguson 1529 tractor ( i think a 2010). Recently took it to the dealer because the low oil light was on and the dealer told me i need a complete engine. $7000 +4 grand in labor and taxes for the complete job. I was able to find a label on the valve cover says engine...

I was doing an engine oil change yesterday and grabbed the grease gun to hit the fittings that are not accessible because of my custom skid plate. (I have to pull the plate to get to the engine oil drain plug.) As I was blowing grass clipping debris from the rear of the tractor, I found an...

Hey guys So after much looking at a new CUT's I've narrowed my search to 2 used Massey Ferguson's that are both local to me. 1- 2010 Massey 1529, 235 hours, FEL, R4 tires, hydro- $13800 2- 2010 Massey 1529, 440 hours, FEL, R4 tires, shuttle, 5' bush hog, 5' rippers, single row plow, 5'...

Hi All, Looking to purchase my first tractor soon. I've got my eye on a 2013 Massey Ferguson 1529 shuttle shift with 300 hours. It has a quick attach bucket and is advertised as being in "excellent condition". Private seller is asking $13k. Is this a good price? Thanks!

OK i just purchased a 2010 (i think from paperwork it might be a 2008) Massey Ferguson 1529 tractor with backhoe and loader. We used it early today then while washing it off we decided to remove the backhoe to familiarize our selves with the process. After we got it off we could not get the 3...

I'm going to start this thread for the MF 1529, so that my progress has some continuity to it. Currently, I'm working on the instrument panel. I've got two lights, which come on with the key: one is a picture of a battery, which I figure means the key is on. ? The other, adjacent to it, I...

My PTO wobbles, somewhat. I hooked the brush hog up today, just to see how it acted and it shakes it up pretty good. I was wondering what's involved in getting the shaft out and can it be straightened? OR, .. can it be straightened with a block of wood and the right size sledge hammer? ...

Bought a MF 1529 last Sat, to supplement my Ford NAA. While, I can get the hood open from underneath, I notice a cable attached to the release latch, but, for the life of me (without tracing it back), can't find a hood release knob among the many others. Where is it?!!

First, let me say thanks to everyone who has posted on the forum. Reading your information has been most helpful. I bought a barely used Massefy Ferguson 1529 tractor earlier this year, with just 90 hours on it, from the local dealer. As I wanted to use it for firewood gathering here in...

Hi all. New member here. I have got a little bit of an issue and was wondering if the brain trust here can help me. I have a 2010 MF 1529 with 350 hours and the engine is shot. The intake hose decided to crack just before the manifold and the engine has been sucking in dirt and is basically a...

have a 2012 mf1529 with a L100 loader, want to add a grapple bucket and have hydraulic hook ups in the front and rear for accessories. What do I need to do this, part numbers would be helpful. I can do the work myself, just don't know what I need.

The local dealer has one he wants to move, and it is in the size range that I think I am looking for. Primary duty will be snow removal with rear 3 point snowblower, probably 5' or 5.5 foot. Secondary duties will be landscaping (short term) and garden prep and pasture maintenance longer term...

I have been a lurker for a couple of years and just joined TBN today.Last week i bought a used MF 1529 with loader (59) hrs to replace my older Kubota L2350. Now everytime i try to start the PTO with my bush hog the shear bolt on the PTO shaft busts. I am sure its operator error, any ideas...

Hi, This is my first post here so please bear with me if I do not have all the terminologies correct. I have a leak on the passenger side front axle where the axle pivots when you turn the steering wheel. I have a Massey Ferguson 1529 with 240 hours and it is just out of warranty. I researched...

Thought I'd share this here as well. My dad asked me to help him weld up a skid plate for his 1529 massey and this is what we came up with.

My dad uses his new 1529 mainly in the woods and for bush hogging and asked me to help him fab a skid plate to add some protection. We used 3/8" plate to add some weight as well. It fastens with four bolts using the loader sub frame brackets.

My Massey Ferguson 1529 tractor has the industrial tires & wheels. I bought it used. I'd like to install the ag wheels/tires for better traction. My tires have 455 hours on them so they're not worn too much at all. It appears to me that ag wheels/tires from the Massey Ferguson 1532, 1533, or...

I could use some help folks. I'm looking at a 2010 Massey 1529 with FEL and 8x8 synchro shuttle. It has 253 hrs and good to excellent cosmetics and loaded tires priced at $11000. Is this a good deal? I had really wanted a hydro unit but if this is truly a good deal I may have to pull the...

New member but been researching on this forum for a while now. I would have been lost trying to buy a tractor without this forum. So my dilemma is one I am sure has been answered many times, but here goes. Wife and I just purchased 10 acres, 8 wooded, 2 open. We are looking to clear possibly...

I am in the process of purchasing a new MF1529 with a FEL. It come with a standard attachment type. The dealer offered a quick attach (MF type?) or a skid steer type. I would like to purchase pallet forks and be able to change out the bucket and forks easily as tasks come up. Any advice or...

I have been looking for a few months and have narrowed my two choices down to a MF 1529 or 1533. Besides the horsepower difference and the telescoping 3 point I am going to assume that the biggest part of the price difference is the horsepower. Is not having a telescoping 3 point that big of a...

Hi all, new here, have a Massey Ferguson 1529 with FEL & backhoe, Only have 7 hrs on it when it was delivered, Now I just want to go out and play !!!

I'm looking at trading in a MF 1529 that has a front loader that was purchased a year ago with 41 hours on it. What should I be looking at as far as trade-in value?

Just wanted to say thanks and contribute. I lurked and searched this site for some time before pulling the trigger on my new Massey 1529. So I thought I'd contribute what little I could and share pics of my new Massey. I purchased it this weekend and it was delivered yesterday. I got the FEL and...

Hey guys, can I get a price check on a new MF1529 with HST, FEL, and R4 tires. Dealer is quoting a cash price of $16,200. Thanks.

We got just shy of 20in of snow dumped here in NE Indiana. Got some great seat time on the Massey today.

My last tractor(NH TC29D)had a small, plastic tool box above the top link. I kept my work gloves and some tools in there. I was in Sears today and saw this little tool box on sale for 13 dollars. Problem solved.:thumbsup:

Hello all, I bought a MF 1529 a couple of months ago and love it. Of course I've abused it a little and need to repair a couple things. I've searched google a lot of a 1529 service or repair manual but haven't found any. Any ideas where I can look for a shop manual? thanks!

Well, just committed to a 2010 Hydrostatic 1529 w/ FEL, 60" Rotary Mower, and a 72" Grader Blade. Can't wait for it to get here, it's still at the assembly plant in Baltimore. I will also be looking for a used 72" finish mower, just seems that a good used finish mower can be bought for a lot...

Hi everyone, I've been monitoring the forums here for a couple months while I've been going through my tractor search. Now I'm finally nearing a decision and I decided to post to get your opinions. Here are my options. These are all cash (or higher finance rate) prices: 1) MF 1529-- FEL...

I am thinking of getting to use as a snowplow, and for light grading. I am wondering if anyone knows anything about them?? Particularly, the hydraulic hook ups. Oh yeah, don't forget to talk to me about the price LOL

Hello, Does anyone know if MF 1529s' are in dealerships yet? I was just aon the Massey site and under "What's New from Massey Ferguson" on the homepage has 1529 and 1532. From what I understand, the 1529 will come with a 8x8 SyncroShuttle transmission (Haven't heard anything...