massey ferguson 1020

Im trying to determine the best way to add power steering to my 1020, whether it be retrofitting something or tracking down a factory setup. If anyone has pics of the powersteering setup on their 1020, i would appreciate you posting them to give me an idea of how it’s supposed to go together...

HI everybody, new to forum. Is there a replacement gas cap part# 72104840 available, or a equivalent to buy? Thanks, Kyle

I am looking for the right hand front axle for a 4x4 Massey Ferguson 1020 or 1030, does anyone have a parts tractor or a good source on compact Massey parts? Thank

I have a 1992 MF 1020 that uses 10/30 oil. Where I live I can only find synthetic oil. My question, is it ok to use synthetic in this tractor, thanks?

Just installed a new regulator on tractor today and miraculously it worked. Due to no parts available from MF I ordered one for a JD 650, had to really push the plugs together but it worked and the alternator is charging the battery. This all started when the tractor wouldn't start, checked the...

I am looking for a lower support arm for the right side of a Massey Ferguson 1020 4x4

I'm looking for some pictures of the parking brake pawl for a MF 1020, which is located right above the clutch pedal, preferably both with the parking brake lever in the on and off positions, but not actually engaging the brake pedal ratchet, mine has been mangled and welded on by a previous...

Hello, hopefully some on here can point me in the right direction. Over this past winter the tractor became harder and harder to start until it just would not start. I found cloudy looking fuel coming from the filter and so I drained the tank put in fresh fuel and installed new filter. I did...

I am looking for an alternator for my Massey Ferguson 1020. Where can I find one or are there any alternatives that will work? Thanks, 1Tom

I'm unsure of the year, but my MF 1020 started leaking oil out of a plastic plug today on the side of the bellhousing. The plug was loose and cracked. It seems odd that a simple plastic plug could be holding back a major oil supply. I have attached a parts diagram to show what I mean. Is this...

My Grandfather recently passed away, leaving behind his immaculate 1989 MF-1020. When I say immaculate... he literally washed and waxed it after every use and I couldn't even believe it was a 1989 - it looks like new! Anywho, it's a 1 owner MF-1020 4WD 3 cylinder Diesel. He even left the...

I am trying to source a MF 1014 loader for my 1020 tractor. I am to the point of perhaps having one fabricated. Would anyone like to share with me pictures of the loader frame bolted onto the tractor and also the hose hookups to the tractor. I have just purchased this tractor so it's all new to...

I got a good running and working MF 1020. I also own a 1010. I love both of the tractors. Easy to trailer on my car trailer and handle all the small implements. The Tractor must have been used to do some corosive work like moving fertilizer or salt.. The right fender and the floor panel had been...

I have a massey 1020 with with a 6 wire (red,yellow,green,black, blue and blue)voltage regulator pn-RS5104 and a 2 wire alternator pn-GP9153. The 2 blue wires on the voltage regulator connect to the 2 wire alternator. Does anyone know if those 2 wires must connect to a specific wire on the...

Checked with local AGCO dealer for fuel cap for MF 1020 and part is no longer available. They directed me to other dealers that showed the part in stock but still no luck. Part numbers are 3283679M91 (MF) and 72104840 (AGCO.) Can't fill tank over 1/2 without diesel spilling out. I would hope...

Hello, I am working on rebuilding my MS142 engine and I seem to be running into a wall finding parts. I am trying to find a source for the bottom end bearings, specifically the rod bearings. Ive searched and searched online and called several dealers locally who tell me they are no longer...

I have a Massey Ferguson 1020. I need a 4X4 front end for it. Do you no of any for sale or other tractors that match? Thanks Mike

I have a 1020 Massey Ferguson Tractor that has slip out of four wheel drive and I am not able to get it back into four wheel drive. Also, the ignition switch has come apart, I was able to put it back together and tape it together. But the lights stay on all the time. I have not been able to...

Does anyone have a diagram of a massey ferguson 2962 series tractor parking brake. I just bought this tractor and the parking brake spring that attaches to the lever is off and I can't seem to figure out how it is supposed to attach and operate the parking brake. Thanks for any help.

I have a 1986 massey ferguson , mf 1020 4 x 4 with a front end loader and hydrostatic tranny. I have lost all hydraulic lift at both the laoder and the three point hitch and lost the power steering. Nothing completely dead. The hydrostatic transmission is operating ok. I really don't know where...

What type of oil does the Massey Ferguson 1020 use in the crankcase? Also, what filter type? (I cannot locate my Owner's Manual.)

I have a MF 1020 hydro tractor. Need part numbers for the two hydraulic filters. Thanks

this is my First Post. I have recently bought a 1020 Massey Ferguson with low hrs, seems to be in good condition. but I noticed a slow leak of Hydraulic fluid from the rear axle. It appears to be something like a freeze plug, it is located between the Hydraulic oil drain plug and where the...

when i depress clutch i cannot put tractor in gear I thought a bad clutch would not let tractor move but it appears just the opposite and it does not disegage the engine from the transmission

Hey guys I have a mf 1020 diesel 4wd, it has been sitting for a few years, it had water in the fuel so i drained it, put fresh fuel drained bowl bled out old fuel it is running now, but the hydraulics do not work (FRONT OR BACK) SO I checked the fluid and it was low so added fluid, still...

Have a MF 1020 and the starter will not engage. Gear selector is in S. PTO is off. Is there another starter cut-out?Battery has good charge & glow plugs are pulling a load. Elec system is otherwise normal. I have a nagging feeling, I have missed another cut-out switch. Any ideas?

Hello, New to the forum. Need a little help with a 1990 MF 1020, 4x4 Hydro trans tractor. I need to chance the hydro filters and fluid in the tractor. I can find specs for the filters and get them from Wix. I have a maintenance manual and it doesn't have the specs for the hydraulic fluid...

Help! Trying to get parts for front axel of MF 1020 FWD Seals, bearings etc. Am in UK, but if shipping is reasonable will buy from overseas to avoid scrapping cherished tractor. email tudor.barn@btinternet.com

Just purchased a 1985 1020 and need to replace the battery. It appears that the old battery had been installed with positive ground. Is this correct?

Massey Ferguson 1020 lift stopped working and I need to know what kind of oil the lift uses so I can change hydrolic oil and filter. I am told this might be the problem.

Hey today I tried to lift a round bale of hay with my tractor I guess that's to much for it since I bent both lift cylinders anyone know a place or if I can put bigger lift cylinders to make lifting the bale possible

Howdy All, Im a newb to all things Tractors but trying to get my feet wet. I am hoping to hear some recommendations on 3ph tiller attachments for a MF 1020. Its got a 21 hp with a PTO HP rating of 14.5. My main questions in choosing a tiller attachment are... is the appropriate tiller...

I bought this tractor & by accident I disengaged the 4 wd. I need to learn how to engage it.

Just purchased a 1992 Massey ferguson 1020 gear drive 4wd with 1014 loader seems to be a very stout little tractor . Any pros cons to share on this tractor any info is appreciated

My Massey needs to be rebuilt . It has a Toyosha-CS112 and I'm having troubles finding parts online . I'm looking for any information that I can get on this. (places to look for parts,other tractors this engine might have been put in,ect.)

My Massey needs to be rebuilt . It has a Toyosha-CS112 and I'm having troubles finding parts online . I'm looking for any information that I can get on this. (places to look for parts,other tractors this engine might have been put in,ect.)

I'm trying to locate a voltage regulator for MF 1020 standard 2wd. I tried ordering one from a massey ferguson dealer, but they were unable to find one. If anyone can help I would greatly appreciated it. Thanks for your time and help. Chuck

i keep shearing key on steering shaft i am considering drilling shaft to insert 1/4 in compression pin to replaace key any recomendations or someone who has had similiar trouble

i keep breaking key on steering shaft i am considering drilling shart and installing compression pin??? any suggestions thks

I need to drop the drive shaft for the four wheel drive so I can remove the oil pan. I have a manual ordered but wont have it for a few days.:mad: I don't have the patience to wait for it . This is the first time I'm doing something more than just oil changes and lubes......Ok to my question ...

CAN SOMEBODY LEAD ME IN THE RIGHT DIRECTION ON A GOOD PLACE TO GET MASSEY PARTS. I'M LOOKING FOR FILTERS,GLOW PLUGS,ECT. DON,T WANT TO SOUND LAZY AND NOT LOOK FOR MY OWN PARTS BUT I SPEND HOURS AND HOURS A DAY ON THE COMPUTER LOOKING UP EQUIPMENT AND I'M JUST TRYING TO SPEED THINGS UP A LITTLE...

I've been trying to get a book for my Deutz 5220 Hydro. The MF 1020 is the same. I ordered 2 books from different Companies and each time they send me a flipping gear drive book. Is there anyplace I can buy the downloadable book. I am getting sick of waiting for books. My tractor is down and...

There seems to be alot more parts available for the MF 1020 then the Deutz Allis 5220. However, everytime I look around it keeps coming back they are the same tractor. Mine is 5220 Hydro, 21hp Toyosha 4wd. I'm just trying to find out if I can order the MF manual and filters for 1/4 the price.

I have a 1985 Massey Ferguson 1020. I would like to know if there is a pair of hydrolic points that i can get to so i could atach a loader onto:laughing: if you could tell me a way to find them that would be good.

Looking for the part numbers for the hydro filters on a 1990 Massey Ferguson 1020 hydro trans 4x4. There are 2 filters. Any idea on a filter number. The dealer quoted me $136 per filter. They appear to be standard spin on filters and don't have numbers on them. If I had a number, I could...

Hi, I am having problems finding part numbers/alternatives for the Hydraulic and hydrostatic oil filters and also an equivalent to the recomended Permatran 3 oil. Any help greatly apreciated. Nick

Buying a property in which the current owner has a MF 1020 with Turf tires and a 5ft finish mower (don't know the maker). Tractor has around 1400 hrs on it. I also have no idea what year it was built nor seen it in person. Lets assume it is a mid to late '80's model and in good condition. I...

I have a M-F 1020 and can't locate the Hydraulic reservoir, have the Operators Manual but it doesn't show the reservior.

Trouble with my little guy, my hydraulics and FEL won't work. At first it was just when it started up and would "kick in" after a minute or so. That happened a coupla times and the next time it didn't kick in.Un and recoupled the quick releases, nope. Next I removed the filter and shook it out...

I'm new to this. I have a MF 1020 with FEL MF1014. I want to add a backhoe but haven't been able to figure out what would fit this tractor. There is a MF 3165 tractor (blown motor) with backhoe available cheap nearby. Would this backhoe possibly fit my tractor?

Looking for some turf rims for my 1020. I have ag rims and tires at the moment. and would be willing to trade or buy a set of turf rims and/or tires if anyone has any laying around. I live in Mississippi but if i have to ship i will. If you want to swap even if tires are close to same...

I have asked this question before, but I can't remember where so I can't find the answer. I have a MF-1020 HST and I am looking to put a FEL on it. I am only going to do yard work, so I am not too woried about capacity etc. Anyone got any suggestions on type and where I can get one...

I am looking for engine parts for a 1987 MF 1020 with a Toyosha cs112. Any help would be greatly appreciated.

I have bought a used MF-1020. It does not have a FEL. I am thinking about adding one for light duty work around the house. Any suggestions? I have used large backhoes etc so I know how to operate it but I don't know what to buy. Is this tractor big enough for a FEL?

I recently purchased a MF-1020. Serial # 01998. Does anyone know the year it was made? Is the pto live? It has a hydro Trans. Is that any good? I paid $3900.00 for it is that a fair price? It has turf tires on it is that original? The paint & sheet metal all seem straight & good. It has no...

i have found a mf 1020 4wd with 90 original hours. The lady wants 3500.00 for it and I am in the landscaping biz. Will this tractor perform well, i know it will pull a 3pt hitch aerator but how about a rake and blades. any info will be greatly appreciated. Thanks

I am new to the board and I have a favor to ask. I do not know much about tractors but I need one and ran across a used 1020 with about 400 hours on it. They are including a finishing mower and asking 5000 for the both. Is this a good deal? Thanks for your help.

I own a '93 MF 1020 Standard in very good condition except the decals... Does anyone know where I can find a complete set of decals for this tractor?? And maybe the approximate costs? Thanks for any help. Regards, Mark

massey ferguson 1020 won\'t shut off when ever the key is shut off the tractor keeps running any suggestions on what is causing this and the cure

does anyone have any experience with a massey ferguson 1020? i have the opurtunity to purchase one for around $2500. it is 2wd and has a front grader blade on it and only has about 600 hours on it, it is an early 80s model i believe. all the tires are good and it runs and works great, i know...

Anyone with info on a mf1020 2wd? - Looking at this little tractor, 682 hours, hydraulic dozer blade on front and tire chains, been garaged untill about a year ago, sheet metal is great on the hood, frenders have some rust and 1 is dented a little, runs good tires are good. It has a 3 spd trans...

Any one ever hear of a MF 1020? Who makes it, and are parts avalble for this? Also how much would a FEL increase a price of a used tractor? Thanks.