mahindra 2810

I have noticed the new to me Mahindra 2810 ,is leaking fluid around the brake rod where it enters the axle housing . I looked at the service manual , as well as I can determine there is nothing to control a leak but a rubber boot around the brake rod . Has anyone ever made this repair ?

I just purchased a 2810 with loader . I wandering if anyone has a service manual and a parts manual that could be copied and purchased ? Thanks and be safe

I have a Mahindra 2810 classic. The fuel tank was left completely full and burst the filler neck off, i know some water got into the system. Drained completely and replaced fuel and filter but engine still runs away. Only way to stip it is disconnect fuel line. Neither the key switch or pull out...

Hi Folks, New to the site and need help if any available. I have a Mahindra 2810 4x3 speed, shuttle shift and seem to be stuck in 2nd or 3rd gear. When I shift out I go nowhere, but if I stay in that gear- which ever it is- I have H/M/L gears and Reverse. I took a cursory look underneath and it...

I searched on line and can find Bradco 3375 parts list but the parts list is not for the X. I busted my 16" bucket and want to replace it with a 12". I am up in the mountains, we grow rocks and trees so the poor machine takes a beating. Anyway if anyone know a source for this please let me know...

Good Afternoon everyone, I have been having issues with shifting my 2810 4x4 into reverse. It grinds a bit and would like to fix this issue. I have been content with it but want to not cause any more damage than necessary. I was wondering if there are any adjustments other than the linkage...

I need help from anyone that owns a Mahindra 2810 old or new sheet metal version. I own an old sheet metal version year 2000 however I do not have an owner's manual for it, only a new sheet metal version. Nor is an old sheet metal version available for purchase. I am trying to add the optional...

Hi, I was using my 2810 to cut a trail through the woods today and all of a sudden I have no steering at all. The steering wheel and shaft connected to it actually pull right out. Is this just a pin or something that has broke that links the steering shaft to the front axle?

Youtube video of what it is doing... https://www.youtube.com/watch?v=MdJUFY8xfZc Original thread here: http://www.tractorbynet.com/forums/parts-repairs/341567-bench-testing-starter-does-seem.html ...

youtube video of what it is doing... https://www.youtube.com/watch?v=MdJUFY8xfZc Original thread here: http://www.tractorbynet.com/forums/parts-repairs/341567-bench-testing-starter-does-seem.html ...

This was posted in parts/repairs, but I thought it might help the owner if I linked to it here. http://www.tractorbynet.com/forums/parts-repairs/334552-help-tractor-not-moving-need.html Default HELP!! Tractor not moving need to move today I was loading dumpster with bucket this morning...

Hey all, I'm getting ready to start overhaul on house stripping siding and roofing. Looking for attachment or ideas for a bin to put shingles in to bring around to dumpster. Many thanks, Mike

I seen one post on how to replace seal on a hydro2810.. I have the gear drive 2810. I was thinking the back plate had to be removed to pull axles..i cant imagine its like the hydro version? can anybody tell me? where can I buy a complete service manual?

Own a 2810 Mahindra noticed when greasing the knuckle steering arm grease shooting out a hair line crack on both the left and right knuckle arms on each side of the tractor is that crack supposed to be there or is it damage thanks? Have a photo both from a distance and close up.

Mahindra 2810 engine running wide open throttle. Need help solving this problem

Hello, I have a Mahindra 2810 gear drive that I bought used. I haven't had any problems with it until this weekend when a load grinding/squealing sound started. It sounds like it is coming from the front right axle area. The noise only occurs when I go forward. There is no noise when I go...

Hi, I have a Mahindra 2810 gear drive and this weekend I ran into some problems. I am not sure if these are all related or individual problems. This is what happened in order: 1) I noticed there was a small amount of fluid leaking out of my joystick (control valve area). 2) I could not get my...

Hello everyone, I have been a long time reader first time poster, Anyway to get to the point I have a 2002 Mahindra 2810 shuttle and the starting began to become intermittent a few months ago I kept checking everything trying to figure out this problem jumping between what I could find online...

what type of hydraulic/differential (rear end) fluid does the Mahindra 2810 use

can you tell me how i find out what year my mahindra 2810 was made is there a stamp on tractor some were

I recently purchased a 2000 Mahindra 2810 4WD and I love it to death. Was out bush hogging early this morning and my right front tire deflates when I turn. I removed all lug nuts so I can have it inflated/tube installed however the rim will not come off. No matter how I pulled, twisted...

I have this 2810 and it has been a good tractor. recently I had issues with reverse. I could hardly depress reverse and it would barely move. I the done the smart thing and checked the book for options. well, the linkage needed to be greased so I done this but to no avail. I took it in to the...

Glow plug light on dash came on while mowing and won't go off. Heat strip on top of plugs is heating. Replaced Glow Plog relay but did not solve problem. Could the timer be causing problem? Where is timer located? Or am I overlooking something?

I'm looking at buying a Mahindra 2810. It's 8 yrs old and he is asking 7000.00. It's garage kept and looks great. Has 300 hrs on it. What I'm looking for is something with a front end loader and I would have to purchase one for it. The best price I can get on the FEL is 4000.00. I'm worried that...

Hi Guys! I see that 2810 was made in S. Korea and the engine was made by Dog Chow or something like that : ) The 2815 is made by Mitsubishi. Is there a significant difference in quality here? Thanks!

Does anyone with a backhoe mounted on their 2810 hydro have any pictures of their sub frame they could post. Just bought a woods 7500 3 pt. and would like to build a sub frame thanks.

Has anyone found an online parts catalog for the 2810 HST? I hate calling the dealer and saying.."Well...I need that little solenoid on the right side of the motor that shuts it off when you turn off the key. And the little nylon lever that attaches to it!". Would be really nice if you could...

what size tiller would a 2810 hydro be able to handle thanks

I have a 3 yr Old 2810. I blew out a hydraulic hose that connects to the system up by the hydraulic filter. A friend helped me temporarily by going to an auto parts store. Now that I have the tractor home where I can fix it, I have lost the original hose. I have check the "Service Manual" and...

I am looking at a Mahindra 2810 with a front end loader. I have tree acres to bushhog, finish cut and grade a drive plus other work as needed. I haave some questions bing new to the tractor market. Are the Mahindra tractor parts hard to get? This tractor is a 2001 model and has a FEL. Are...

I know, they're not really comparable to each other. But here's the deal: I went to the Mahindra dealer to look at the 2015 HST, a competitor of the CK20. Dealer says he needs to move the 2810 off the lot. Bottom line, 2810, FEL, Howse 5' brush hog, Howse 5' boxblade, and disk for $15,400 out...

Can owners of 2810's tell me if they handle similar to a larger garden tractor? Are they agile? I am looking at large garden tractors, but feel a small Mahindra may offer a whole lot more for a similar budget. A big problem is that to get a mmm, a 2810 HST must be purchased because the other...

mahindra-ML-252016-ML- Moved to Mahindra Forum.

I found specs with pics on the web of the Mahindra 2810 HST if anyone wants to take a peak New England Tractor . It looks real nice, called them and they should have one to look at in a week or so. Cant wait to see one up close. But then again i've been real happy with me 2810 with shuttle...

Here is a picture of my new tractor. I have had it for a few weeks and love it.

mahindra-ML-181817-ML- Moved to Mahindra Forum.

I would just like to say Hi. I have been lurking here on TBN for quite sometime and have really enjoyed all of the informative posts that I have read. I think I am getting closer to buying a tractor. I have a few questions. 1) 2810 Mahindra w/ FEL (Bush Hog brand), 5' Bush Hog rottary cutter &...

Very similar look, similar spec sheets, and priced identical. The Century is slightly heavier with a little more 3 pt lift capacity but the Mahindra has independant PTO. Mahindra may be a little more recogonized in Okla. with a longer history but there also seems to be more Century dealers...