kubota m95

Hey all, looking for a little input here... Currently having hydraulic issues with my M95. When I activate any lever the system doesn't hold steady pressure. The steering feels sluggish, and I have no power going uphills. Already checked the quick connects, everything thing seems ok, fluid level...

Back on this M95 today. We have an oil transfer issue from the center main housing into the left side spindle unit. Parts book shows a seal and a bearing on each end of the center housing where the differential shafts mate with the spindle units. Removed the spindle unit, the bevel gear, and the...

Any thoughts on the proper way to fill/check the fluid level(s) in the front axle? There are plugs on the center housing, a fill port and a smaller (level plug I assume) just below that. There are also plugs on each of the front axle cases. These ports are quite high on the cases and seem to me...

Can anyone give me an idea what type of fuel usage, I can expect running a M95S with 15ft bush hog? Any idea what the normal usage fuel is? Front loader work. fencing projects.

Hello everyone, I have a question regarding a M95S, going to look at it tomorrow. It HAD a Broken Syncronizer gear, that has been fixed by the dealer, which is where the tractor currently is. I spoke to the dealer today, who said that he had no problem adding a warranty to the tractor. It only...

Looking at a new m96s and was wondering if any of you all run one and what are your pros and cons on the unit. There is just not alot of info anywhere on the web regarding this series of kubota's.

My dealer has a New 2007, 2wd, canopy, sun faded, M95s on his lot for sale and is asking $25K. Does anyone know if this is a good price or not? Stu

I just got back from trading in my L4330 in on a slightly used M95s with 250 hours on it. It should be delivered Monday or Tuesday. What a great stocking stuffer. Here are a few pictures.

I am seriously considering one of these. I started out looking at the 9540 but it is a significantly smaller chassis than the M96. Right now I am using a 4320 to pull a 12' cutting disc, 20' pulverizing disc and a 20' pulverizing disc. I am wondering how close to the edge of its envelope the...

I am torn between these two tractors. The Kubota is only about 7k more than the NH. (for 20 more HP!). I know this should be a no-brainer (I am leaning toward the Kubota). I have heard few folks complain about their tractor being too large. Both tractors are at a dealer I like (where I bought my...