john deere x320

I Cannot get the Steering gear off of my JDX320 lawn tractor. There isn't enough space between the steering gear and the steering shaft to remove the gear. Does anyone know what the trick is to get the gear off? Thanks

Need a new Part #BJD514 Hood or side and top panels for hood. Grandson lowered Kubota L2900 rear boom and crushed top and sides. These things cost $750.00 complete. This is the new model serial number above 280001. Any help would be appreciated.

I have a 1.5 acre property with some hills and trees to deal with. I have an uncle that has a zforce and really likes it. I have an old Deere 160 that just died, so I tend to lean towards the Deere tractors. Which would be better?

Guys. I have a JD X320 with 115 hours on it. Looking to sell straight out as I want a ZTR. I think it is a 2010 but I've been mowing about 3/4 an acre over this time'. What's a fair asking price? Thinking $2800 to move it. Thanks

runs for 15 minutes then stops, let set 1 minute then starts and runs about 1 hour then stops again. when it starts to stop I can choke and make it keep running. I changed fuel filter thought that was it but did same thing next week. some one suggested fuel solenoid. why would it only cut out...

Had the X320 about three weeks now. Right at the 8 hour first oil/filter change. Here are several observations: Seems as if it drinks a lot of fuel. Capacity is 3.3 galons. It takes that to mow 5 acres (mostly at top speed).. It has a cruise control which I used one time. Today it doesn't...

Thought I needed to charge the battery this morning, but when I lifted the hood I was greeted with bunny fur and chewed up wires! Can I buy the replacements and take care of this myself or am I going to need to haul it in to the dealer? I can't find a schematic/diagram or parts number for what I...

Would it be okay to replace the 15x6.5-8 2 ply front tires with 16x6.5-8 4 ply or would there be too much difference in height between the back and front? I would think that I would have to replace both front at the same time if I do so. The latter size appears to be easier to find and I think...

I just purchased a JD x320 used with 66 hrs :). Looks new. Any user tips, cautions or advice? Looking forward to getting to know the x320. Thanks

New to this forum. I am about to purchase a JD X320. I want to mulch half the time and use the powerflow bagger the other half. I don't want to get the mulching kit/baffles and then have to remove the deck and baffles when I want to bag. So, would using the JD mulching blades (without the...

Is this a good tractor? Its a 22hp with 48deck. The tractor has a snow plow, john deere trailer and only has 38hrs on the machine. It has been garage keep and has 4yr warranty with the machine. Is 3,000.00 a good price for the setup? :confused2:

Hello, Im new to the site and i got a new 2012 JD x320 48'' deck. Love it, so quite and smooth. My question is should i put on a mulching kit or a bagger. i had a toro zero turn with a bagger and i liked it,but i live in an area where its hard to get rid of bagged grass. So im thinking of the...

I'm thinking about buying a new x320, for my dad who is 81 . He has an older lx 176 that still runs pretty good but he's mowing about 2 acres, and I just think the bigger tractor will be more comfortable for him. I have a 2305 but he has a hard time getting on it so I wanted sometime smaller...

My John Deere L130 transaxle has bit the dust after 6.5 years/550hours. I am looking to replace the machine with a JD X320. The x320 uses a Tuff Torq K58 transaxle. Is the tranny user serviceable...I think I see a filler/drain plug on it??? Can someone confirm if the fluid can be changed? I cut...

Anyone out there have a wiring diagram for X320? Want to wire in a permanent plug-in for a tow behind sprayer for my wife to easily hook up. Would like to use the spare fuse on fuse block to do this. X320 is a 2008 model.

The situation: My grandma is going to be buying one of these this week. She currently has a JD lt133 that is 10years old that she will be trading in as well as a kk 5' 3ph mower. Both in good shape. Both dealers are decient to deal with. The 'bota dealer is the one that I bought my 3400 from...

OK...so here goes my predicament. I just purchased a home...2.6 acres..about half grass....half wooded... I have a stone driveway that is about 200 yards long...grass on both sides but it has anywhere between a 15-35% grade. First...I was thinking this craftsman model for a few...

I bought a brand new x320 about a year and a half ago. The machine has been broken more then working. First off the carburetor would cut out on inclines, either up or down the inline/hill and not big inclines at all. It would load up the plugs and it would not start. Brought it back twice...

Horst HLA 3000 84" Snow Blade on JD 3x20 I'm considering a FEL mounted power angle snow blade for my JD 3320 300cx. I've found a 2006 slightly used Horst HLA SB300007 84" with the JD QA mount. MFG specs show it at 900 #'s The HLA 2000 series is 535 #'s and would likely be more than adequate...

Anyone know how to disable the RIO on the new JD X320. Just bought one and would like to disable it.