john deere 70

Good running John Deere 70 Tractor with wide front end. No hour meter, so hours are unknown I have video of it running, if interested

Hello All - been coming to this forum for some time to find answers but this has me stumped. I own a 1992 755 with model 70 loader. I recently found a great deal on a 1994 855 4x4 with no loader. According to the serial numbers, the 70 loader should fit on the tractor, but it is too short to...

Anyone know where I can find hydraulic cylinders for my John Deere 70 loader on my 790, as the dealer wants $1200 per each, and there are 4. I tried rebuilding them with the kit, but it has dents and scratches on the tubes, so they just break the seals and leak.

Well, this weekend was a good one with decent enough weather to take on the job of repairing the loose flywheel on my JD 70. We purchased a taper lock from Allen Machine Works in Tennessee and had the flywheel machined locally once we had the taper lock in hand. It's all together now and she...

Hello We are restoring a 1954 John Deere 70 Gas tractor, the wiring is in rough shape and just need to know if this tractor is pos or neg ground. Thanks Warren

I'm looking for some help adjusting fuel on my 70 I rebuilt. I can't seem to get fuel rails in the 0 position, I've done what the book says and not sure if I have something put in right so I'm looking for suggestions.

Well i think my rings or valves are going bad in the 70. I topped off the oil and coolant couple days ago and i noticed she has really started smoking. even at idle i can see light white smoke and when i throttle up or work the motor it smokes white until you load it down than it darkens also...

I was hoping someone could advise me on the retracted and extended measurements on a 70 loader for a John Deere 790 on the bucket. I have found measurements for 24&3/4 retracted and 17&1/2 stroke for 42&1/4 please correct me if this is wrong many thanks in advance...Tom

I am looking for a place in Canada preferably close to British Columbia that can machine a taper-lock into my flywheel or sell me a one ready to go with a taper-lock already istalled. I have found plases in the USA but shipping and customs makes it cost prohibitive.

Okay I feel very stupid about this. Where is the oil dip stick on the 70? Before winter I want to change all fluids but having trouble finding it. Or is it one of those fill holes you fill till it runs out ? Last what weight oil ? It's a 1954. Thanks

Hi guys.... I recently purchased a John Deere 70 (Tecumseh VH70 ???). It's OK, I just like the OLD look... Anyway, I took the Engine apart... Do my Magic and now it Starts with 1st or 2nd Pull even weather are in the 25- 30's... Anyway., I wanted to see if any of you guys have turned a Pull...

Hi guys.... I don't know what this parts' name is... Although I know what it does.... I'm very good with Engines... Although I'm NEW to it all since I never got to play with them when I was young. I'm always interested in them but since I was Poor growing up, I NEVER got a chance to play with...

Anyone know what a ball park value is for a JD 70LP Gas that runs good and has all original paint. Also my dad had a question about the tanks on the tractor that if they were 'up to code' I really don't know what he means but it might be if the Propane tanks on the tractor are basically like...

I was mowing grass and chopping up leaves today. I like this tractor, it only has 18 hp, but it does everything I want. The 55 & 70 series are great tractors. One of my goals for this tractor is to get narrower R1 rear tires and then get a 3 pt. one bottom plow for it. Then I'll have another...

OK....I have come to to the conclusion that I cannot replace my trusty old 770 for what I have in her so I am going to keep her. With that said has anyone ever changed their model 70 FEL bucket to another style?:confused: If so how did it go? I really do not have an issue with the amount that it...

What is the major difference in the 2 planters? Do both have different population settings? Do they use the same plates as the 494's do? I am thinking about buying a 70 model. I would like to be able to change planting populations and have settings I can trust. My 494 is just guess work, I have...