john deere 4210

Looking for any information regarding replacing rear axle seals on a John Deere 4210 tractor.

I'm looking at a John Deere 4210 with a 420 loader. Anyone have any complaints about this model?

Thanks for watching and subscribe if you like my videos :) Once again thanks for watching

I started tractor, it started moving, i turned on head lights, the motor died. Won't do anything... I checked all fuses, fusable link, battery. all good. bypassed seat switch. did not help. nothing. no lights are anything.. i'm thinking maby a neutral safety switch, but don know where to...

Hi I had a line rust out last year and replaced a section of it . it was going to the front loader. After that the line blew off and I repaired it, filled with fluid but apparently not enough because after a few days it stopped going ahead and back the way it should so I shut it down and filled...

Just bought a used 4210 that will not disengage the MFWD. Previous owner complained it wore out front tires fast so think this has been going on a long time. Any one have ideas. I have not gotten any manuals yet.

John Deere 4210 2002 model year JD 420 loader 198 hours one owner garage kept 28 hp diesel hst 4x4 R4 tires tilt wheel folding rops I-match hitch JD LX5 rotary cutter with a slip clutch asking price $14,500 1. Is this a good reliable model and is this a good price? 2. What makes the JD weigh...

This is an '02 4210 with a 3 cylinder Yanmar diesel. When I turn the key all I get is a single loud click (clack?). I replaced the battery and starter (no easy job) and the issue remains. The clicking (clacking?) sound appears to be coming from the other side of the engine than the starter...

Is a JD4210-Hydro big enough to use a five ft King Kutter rotary mower? I have a chance to get a king kutter L-60-40-P-FH rotary mower at a very good price. The JD has the following specs: John Deere 4210 Power: Engine (gross): 27 hp [20.1 kW] PTO (claimed): 23.5 hp [17.5 kW] (gear) 22 hp...

tractor has no move forwords or back replaced pedel censers and changed hidro filter and oil still wont move and yes it was started

I am preparing a major service on my 4210 & I was about to order the transmission suction screen #YZ81443 & went wow when I see the canadian price of $51.00. Does anyone know if I can just clean this screen or should I bite the bullet & pay the price for a new unit. What say you wise TBN...

Hello, This is my first post and am looking for some advice. I am in the market for a compact tractor and have prices on the models listed in the subject. THe b3030 and jd4210 are within a few hundred dollars of each other. The b2630, which the dealer tells me is more comparable to the 4210...

Was looking through the tech manual (800+ pages) now here is a nice book! Noticed there is only a little over 10% difference in torque with the 4210 and 4310 at rated rpm (26-2700) What I suspected from using tractor was true, that the maximum torque for the 4210 is at 1600 rpm and the 4310 at...

In my 4210 manual it states that blue and white smoke is normal upon startup. I don't see this after a few minutes but I do notice that this little bugger stinks if you get exhaust in your face even later on. My Kubota just smells like stinky diesel when you get it in your face, especially...

I just bought a John Deere 4210. I have a trailer but I am looking for a work truck to tow it. Any suggestions what would be the best for this limited purpose?