hydraulic hose

hey guys Can someone share the process to remove the cab off the frame on a 2004 TV145? I would like to swap out all the hydraulic hoses underneath the cab

Would like to buy a hydraulic hose crimp tool for occasional use in my equipment barn. Any advice regarding brands, features, etc.? Do the manually operated “no-name” units in the $800 range work well enough?

I replaced a broken fitting and worn hydraulic hose on my John Deere 3039R snow blade. Now the blade angle hydraulics move fine in one direction and slower in the other direction. I noticed while plowing snow that the blade would change angle when I pushed snow if more snow was on one side, but...

I ordered a TTWT inspired Artillian grapple today. I was disappointed to learn that Artillian does not have a hose kit that goes from the JD true 3rd function hard line quick disconnects to the Artillian splitter manifold. I also ordered the Artillian hydraulic flow control valve as I have the...

Hello. I just ordered replacement hydraulic hose 7J040-661110 for my LA402 loader. I was surprised to see that it is made with 1/4" hose. The old hose that I removed was 3/8". I called the vendor and they confirmed that, even though all the other hoses on that loader are 3/8", this particular...

Hello all, I’m wondering if anyone has any recommendations of a hydraulic hose crimper to buy? Not something to use everyday but a few times a year forsure. I’ve seen some on Vevor and similar but they all look kind of janky. I’ve only ever had hoses made at princess auto, but they won’t put new...

I need to replace all of my lines on the top & tilt spool (Gearmore). The tractor is New Holland compact TC24DA. Can anyone recommend a good source for the hydraulic lines? I’ve reached out to Gearmore but they have not responded.

3/8" hose, 34" long. $96.17 each. I must have been under a rock. I thought: "OK so they're about $25 each but since inflation is only 3.5% since covid everything's doubled so they're probably $50. I should get a spare." ooops, the price was 4x that..... $100 each. ($212.37 for two little...

Had to replace a 4 foot hydraulic hose the other day.....$ 84 for one hose....outrageous !!!

Just wondering what type of o ring the hydraulic hoses take for sealing on my LW8? The description is o ring but is that true or are they some type of flat rubberized seal? Any idea of the sizes used on the backhoe and I guess the loader as well. I’m just replacing the lines outer spiral wrap as...

I have a 1990 New Holland 7308 frontloader on a TC33D that needs new hydraulic hoses for the bucket. I am thinking of replacing all of them since they are all cracking. My question is where is a good reliable place online to purchase them? Should I replace all of them at the same time or just...

I own a XR3135 and I was wondering what is the best method to adding hydraulic lines to the front of the tractor? I believe this may be called a 3rd function. I obviously have lines that go to the skid steer attachment. I'm looking to get the green and blue lines plus a return to the drain, that...

I added a 3rd function kit to my tractor and it leaks on both ends where the hoses run to the attachment to where they tie into the hose that run to the 3rd function housing. I recall using thread sealant somewhere along the path but I don't recall exactly. Does it make sense to use thread...

Installed my DKA144 3rd function valve kit per the instructions and I have leaks. The directions say noting about using teflon tape or threadlock. I have leaks however. Got the hoses and couples threaded together pretty tight. Not really sure what is going on though. Was I supposed to use some...