hp

... and I ran it for a tank of gas and changed the oil (inspected and), I think it looks like it might run for awhile but I didn't really need it. I have other stuff sitting around like a 1/2" QD plate 3x8.5 box tubing, pillow blocks and drive shaft material to connect to the 10 HP right angle...

I am beginning to run into the limits of both my tractor and my aging knees as my hay operation has picked up a number of really good deals on larger used implements. I make hay primarily for my sheep operation, but also to sell on +/— 90 acres. I have kicked arround the idea of getting into...

In the market for a tractor in the 55-60hp range. Been in a sharing situation for a little while, sold my last tractor and regret not having one at my full disposal. Have owned or operated a pretty wide range over the years, I work in underground construction and most of them feel like toys or...

Any ideas of a minimum horsepower requirement for a single point subsoiler in hard clay? Is a 24 HP Kubota LSX2510SU sufficient? The red clay in my area can get hard as a rock when it doesn't see rain and without someway to rip the soil, using a disc harrow, especially a light weight disc...

Hey all, new to the forum (kind of, had an account 15or so years ago). I’m looking to upgrade within the next year from my NH TC29 to a cab DK. My question is, within the DK series is it safe to assume they all for the most part use the same parts and part numbers for things like the PTO...

What current model # is the biggest Horsepower farm tractor that Kubota makes with hydrostatic trans option ? I’d love to have a new M5-111 open station Farm Tractor with a E-Hydro Trans Option. I use to have a JD 4720 66hp OS with Hydro trans & I fluid filled all 4 tires but it still wasn’t...

Will a John Dere 770with about 20 - 21 PTO HP be able to handle an 18" auger, particularly in heavy clay soil? I have not used an auger with this tractor before and do not want to break anything on the tractor. Seriously, thank you in advance to all your hands on experts.

looking for info on oil level indicator and oil change , capacity

Not that it has anything to do with tractors but the last few years have been quite the show. So back to tractors, has anyone seen anything new from Summit of late? I was sort of hoping for a little larger HP tractor but after more research and comparing brands, I am thinking the TX25 would...

I’m on year 6 of owning 20 acres. Ive relied on farmers to plant my food plots and I’d like to end my lease and start doing this myself. I also started a tree farm and will need a tractor for that part. FEL work and Disk ground work will be main functions. My options nearby are: -John Deere and...

I am at a crossroads here. I have a JD 3032E, which has 31.5hp and a Belltec TM-48 hydraulic post hole digger. According to Belltec, the ideal hp is 50hp, with 28hp minimum, so I have just barely enough. I don’t have rear remotes but would get a BLV10461 kit which would add 4 spools that the...

My dilemma.Do I need a new engine or can t be salvaged? My rookie mistake --->Replaced a leaking gasket on carburetor ( engine worked fine before leak developed ) After reassembly , I could not turn engine over with recoil type starter. It acted seized or locked up. I opened both oil level...

I have two implements that max at recommended 40 Hp Tillers says up To 40 pto, mower just says 20-40 hp Got a good price on a tractor with 46 pto Is it too much or lower the rpms 0r? Thanks

Looking at a TYM T494H versus a T574H. Identical machines except the 574 has a turbo charger, which adds +6.7 engine HP and +6.5 PTO HP. Same hydraulic specs, so the pump is as efficient at 48.3 HP as it is at 55 HP. Hmm. I’m curious who would value that modest gain in HP (and probably...

I am looking at a used snowplow for my LS MT 225s. The blade comes in two widths, 5ft and 6ft, and it designed for "25 to 40 hp" tractors. It will be used to plow a long gravel driveway. The used one I am looking at is the 6ft width. Frankly, I would rather have the 5ft blade, but it is used...

I just bush hogged 5 acres of pretty thick 2' grass (3mph) and was also able to do some 4' tall grass (2 mph) with 19 pto hp and a 5' Landpride cutter. It seemed to handle it fine. It was thick grass and I realize if we were talking bramble or brush, it would have been a different story. For...

When comparing same model tractors except one with a cab, will the cab hurt performance on HP or will it help with added weight?

I have been looking at flails and obviously want one that is wider (working width)than the tractor. Betstco is the brand. I’ve talked to the sale people there and their word contradicts what the websites literature says. They said the 48” would be too big for my 25hp engine tractor, but in the...

Morning folks.. I'm retired and want to build a garage with a apartment myself.. I used to do hvac and maintenance so I know a little about construction and Ive been reading.. No building inspections in my remote area of Iowa. So I'm going back and forth about what machine would be the...

Have been trying to wrap my head around the no. of variants these companies create within Row Crop tractors. Even within the same series, you will have 15 different horsepower models creating a range from 210 to 410. How does someone even decide whether to go for 210 or 230 Hp. At such a high...

Hi all, new to the forum so bear with me. I'm tired of endlessly searching the internet and forums for answers so I decided to ask right up front. My family is considering a Yanmar 165d tractor in good condition with less than 500 hours on it on an auction. However at the same auction is an old...

Hi, Anyone how knows if and how I can tune up my lenar tractor. Is it possible to increase hp?